Siemens SIPROCESS GA700 Petunjuk Pengoperasian yang Ringkas - Halaman 13
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian yang Ringkas untuk Peralatan Industri Siemens SIPROCESS GA700. Siemens SIPROCESS GA700 24 halaman. Continuous gas analysis
Halaman Cetak
Connecting
5.1
Electrical connections
Missing PE/ground connection
Risk of electric shock.
Depending on the device version, connect the power supply as follows:
• Power plug: Ensure that the used socket has a PE/ground conductor connection. Check that
• Connecting terminals: Connect the terminals according to the terminal connection
Dangerous contact voltage
Danger of electrocution in case of incorrect connection.
• You can find the specifications for the correct electrical connection in the technical
• At the mounting location of the device observe the applicable directives and laws for
Unsuitable cables, cable glands and / plug-in connectors
Risk of electric shock and material damage
• Only use cable glands/plug connectors that meet the requirements for electrical safety.
• Tighten the cable glands according to the instructions in the respective manuals / operating
• Close unused cable openings for electrical connections.
• When replacing cable glands, only use ones of the same type.
• Make sure the cables are tight after installation.
Safety instructions
Compact Operating Instructions, 09/2018, A5E45779403002-01
WARNING
the PE/ground conductor connection of the socket and power plug match each other.
diagram. First connect the PE/ground conductor.
WARNING
specifications of the respective analyzer.
installation of electrical power installations with rated voltages below 1000 V.
WARNING
instructions.
5
13