Siemens SITRANS L Panduan Petunjuk Pengoperasian - Halaman 26
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Industri Siemens SITRANS L. Siemens SITRANS L 38 halaman. Ultrasonic transmitters
Juga untuk Siemens SITRANS L: Contoh Aplikasi (11 halaman)
Halaman Cetak
Operating
6.6 Adjusting the blanking value
6.6
Adjusting the blanking value
To change the stored blanking value, go to the 'bL' display (as described in Adjustments
(Page 23)), and proceed as follows:
1. Press the "20" key to increase the blanking value, or the "4" key to decrease it until the
correct value is displayed.
2. Release the key. The display automatically returns to the Run mode (6 secs).
26
3
Indicates that the device is now in blanking mode.
seconds
The stored blanking value is shown
(for example 0.25 m)
Press "20" to increase blanking value
(i.e. 0.36 m)
Press "4" to decrease the blanking value
(i.e. 0.35 m)
6
The new blanking value is shown.
seconds
Operating Instructions, 09/2021, A5E37100674-AB
SITRANS LU180