Siemens SITRANS L Panduan Petunjuk Pengoperasian - Halaman 30
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Industri Siemens SITRANS L. Siemens SITRANS L 38 halaman. Ultrasonic transmitters
Juga untuk Siemens SITRANS L: Contoh Aplikasi (11 halaman)
Halaman Cetak
Operating
6.13 Units
6.13
Units
The units of the measurement reading can be selected as follows:
1 = metres, m (factory setting)
2 = feet, ft
The selected units are also applicable to the 'Blanking' adjustment.
6.14
Adjusting the units
To change the units, go to the 'Un'' display (as described in Adjustments (Page 23)), and
proceed as follows:
1. Press the "20" key to scroll forward through the available options (1-2), and press the "4" key
to scroll backwards.
2. Once you have reached the appropriate value, stop pressing the key. The display
automatically returns to the Run mode (6 secs).
30
3
Indicates that the device is now in units mode.
seconds
The current option is shown
(i.e. m)
Press "20" for option 2
(i.e. ft)
6
Option 2 has now been selected.
seconds
Operating Instructions, 09/2021, A5E37100674-AB
SITRANS LU180