Siemens SITRANS LT500 Contoh Aplikasi - Halaman 15

Jelajahi secara online atau unduh pdf Contoh Aplikasi untuk Peralatan Industri Siemens SITRANS LT500. Siemens SITRANS LT500 24 halaman. With profibus and profinet in tia portal v16

Halaman Cetak

3. We have inserted:

- Level module PT1

- Volume Flow PT1

- Sensor temperature PT1

- Totalizer Volume with control (32 bit)

- Totalizer volume with control high precision (64 bit)

- Relay status

Notice we have assigned addresses to the I and Q addresses for each module. These will

be used in our TAG table.

Note

To add or change the modules, you can select a different module from the Module list.

Drag the module in to the relevant slot and enter the I or Q address depending if the

module is an input or output.

4. Double-click on the SITRANS LT500 to show the properties of the device.

5. In the properties window, enter the device name (in our example "LT500" and the IP

address, in our example "192.168.1.77") however your IP address may be different due to

your local subnet settings.

6. Click on the "network view" so we can look at the PROFIBUS DP setup.

SITRANS LT500 with PROFIBUS and PROFINET in TIA Portal V16

Application examples, 04/2022, AG022322

Step 3: Setting up the device modules and process values