Siemens 546-00750BE Panduan Petunjuk Instalasi

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Pengontrol Siemens 546-00750BE. Siemens 546-00750BE 8 halaman. Ce compliant fume hood controller application

Siemens 546-00750BE Panduan Petunjuk Instalasi
CE Compliant Fume Hood Controller —
Application 941 and 942
Figure 1. CE Compliant Fume Hood
Controller(Standard enclosure).
Figure 2. CE Compliant Fume Hood Controller
(Otherenclosure).
Control Applications
941 and 942

Product Description

The Fume Hood Controller Board (Figure 1 and
Figure 2) is the main termination board for the Fume
Hood Controller. The board comes with a ferrite filter
to suppress electrical emissions from the 8-
conductor cable. The ferrite filter must be installed to
meet FCC requirements and CE compliance
Item No. 546-00085. Rev. CA
Installation Instructions
Product Numbers
546-00705
CE Compliant Fume Hood Controller
— Application 941 and 942 with cover
and mounting rail
546-00705E
CE Compliant Fume Hood Controller
— Application 941 and 942 with FHC
enclosure
NOTE:
Keep the controller board in its static
proof bag until you are ready to install.
Warning/Caution Notation
WARNING
Personal injury/loss of life may
occur if you do not follow the
procedures as specified.
CAUTION
Equipment damage or loss of data
may occur if you do not follow the
procedures as specified.
Expected Installation Times
23 minutes.
Required Tools and Materials
Smallflat-blade screwdriver
Prerequisites
Fume Hood Controller Enclosure is mounted
and wiring has been roughed-in.
Operator Display Panel is installed and
cable pulled to location of controller.
Document No. 546-00085
December 8, 2011
Page 1 of 7