Samsung 193P - SyncMaster - 19" LCD Monitor Panduan Servis - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Servis untuk Monitor Samsung 193P - SyncMaster - 19" LCD Monitor. Samsung 193P - SyncMaster - 19" LCD Monitor 40 halaman. Tft-lcd monitor
Halaman Cetak
- 1. Table of Contents
- 2. Service Manual
- 3. Precautions
- 3. Safety Precautions
- 3. Servicing Precautions
- 4. Product Specifications
- 4. Pin Assignments
- 4. Timing Chart
- 5. Disassembly and Reassembly
- 6. Alignment & Adjustments
- 7. Troubleshooting
- 8. Exploded View & Parts List
- 9. Electrical Parts List
- 10. Block Diagram
- 11. Wiring Diagram
- 12. Schematic Diagrams
5 Troubleshooting
Notes: 1. Before troubleshooting, setup the PC's display as below.
• Resolution: 1280 x 1024
• H-frequency: 48 kHz
• V-frequency: 60 Hz
2. If no picture appears, make sure the power cord is correctly connected.
3. Check the following circuits.
• No raster appears: SMPS PCB, Main PCB
• 14V develop but no screen: Main PCB
• 14V does not develop: SMPS PCB
4. State power off, if you push and hold the "Power Key" button for more than 5 seconds, with a "beep" sound, the
monitor automatically turn back to the factory preset.
5-1 No Power
Does proper DC 14 V appear at
Pin 10, 11 or Pin 21 of CN101?
Yes
Does proper DC 5 V appear at
Pin 2 of IC201?
Yes
Does proper DC 5 V appear at
Pin 5 of IC301?
Yes
Does the pulse appear at X101?
2
Yes
While pushing the power key
does voltage drop from 5V to 0V
at Pin 16 of IC301?
Yes
Replace IC301.
DI19PS
No
Check SMPS.
No
Check IC104 and it's related circuit.
No
Check IC201 or IC301
and it's related circuit.
No
Check X101 or check
it's related circuit.
No
Check function key or
check it's related circuit.
5-1