Epson 1810p - PowerLite XGA LCD Projector Panduan Pengguna - Halaman 34

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Proyektor Epson 1810p - PowerLite XGA LCD Projector. Epson 1810p - PowerLite XGA LCD Projector 42 halaman. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Juga untuk Epson 1810p - PowerLite XGA LCD Projector: Pengaturan Cepat (2 halaman), Panduan Pengoperasian (47 halaman), Panduan Pengguna (27 halaman), Buletin Dukungan Produk (5 halaman), Pernyataan Kesesuaian (4 halaman), Daftar Bagian (1 halaman), Brosur (2 halaman), Buletin Dukungan Produk (41 halaman)

Using the control functions

Procedures for new timer settings

Procedure

Click "Add" on the timer setting window. The following

window is displayed and the new timer settings are applied.

At Operation, you can carry out the operations of turning the pow-

er on and off and switching the input sources, similarly for the con-

trol buttons on the main window. If you set the input source

switching, the projector's power will turn on at the timer start time

even if it is not on at the time. Because of this, it is not necessary to

make two separate timer settings for turning the power on and

switching the input source.

After completing the timer settings, click "OK".

The timer settings that have been made will be registered and they

can be checked in the displayed timer list.

You can enable and disable all of the timer settings that have been

registered. Select Timer - Enable or Disable from the Tool menu.