Samsung 5 Series Panduan Pengguna - Halaman 6

Halaman Cetak

Display Modes (ΗΡΜΙ/Ρνί Input)

Opí!ma! ٢es٥!utlon

4๓3 series:1366x7rø@60Hz/50rø series: 1920χ

Kensington Lock

Media Play - Additional Functions

Vlde٥s/Mus‫؛‬c/Photos Play Option menus

When playing a file, p٢ess the TOOLS button.

NOTE

• standa٢d dimensions for wall mount kits are shown In the table

below.

٠ When purchasing our wall mount kit, a detailed installation manual

and all parts necessary for assembly are provided.

٠ Do not use screws that do not comply with the VESA standard

screw specifications.

٠ Do not use screws that are longer than the standard dimension

or do not comply with the VESA standard screw specifications.

Screws that are too long may cause damage to the inside of the

TV set,

‫ ا‬For wall mounts that do not comply with the VESA standard screw

specifications, the length of the screws may differ depending on

the wall mount specifications.

٠ Do not fasten the screws too firmly. This may damage the product

or cause the product to fall, leading to personal injury, Samsung is

not liable for these kinds of accidents.

‫ ا‬Samsung Is not liable for product damage or persona! injury when

a non-VESA or non-specified wall mount is used or the consumer

falls to follow the product installation instructions.

٠ Do not mount the TV at more than a 15 degree tilt.

٠ Always have two people mount the TV on a wall.

The Kensington Lock is not supplied by Samsung. It is a device

used to physically fix the system when using it in a public place.

Refer to the manual provided with the Kensington Lock for

additional information on proper use.

Please find a"

slot is beside the

The position and color may differ depending on the model.

Assembling the Wire Holder stand

Icon on the rear of the TV. The Kensingto

Hoňz«‫١؛‬aí

Preqicy

««‫ ي‬Clack

Frequoicy

la)

frequency

1920Χ

Pctofty

Reeokrtion

Photos

(H/V)

Categonr

Operation

Videos

Music

icon.

640 x 350

31.469

70,1

25.176

You can select another

video file to play directly.

70.087

28.322

Title

720x400

31.469

66.667

30.240

640 x 4๓

35.000

57.284

‫تا‬

๓2x624

49,726

74.551

You can play movie and

music files repeatedly.

Repeat Mode

1152x870

66.681

75.062

100,000

640 x4๓

31-469

59.^0

25-175

37,861

72.ฒ

31.5๓

You can adjust the picture

size to your preference.

640 x 4๓

Picture Size

640 x 4๓

37.5๓

75.0๓

40.0๓

8๓x6๓

37.879

๓.317

You can adjust the picture

setting.

๓,0»

1x6๓

48.077

72.188

Picture Mode

49,5๓

8๓x๓»

46.875

75.๓0

1024x7๓

48.^

๓,๓4

65.0»

You can adjust the sound

setting.

56.476

70.๓9

75,0๓

1024x768

Sound Mode

75.029

78.7๓

1024x7๓

๓.023

1๓.0»

VESA DMT

I152x8w

67.^

75.^

You can play the video with

Subtitles; This ftjnction

only works if the subtitles

have the same file name as

the video.

12๓x720

45.0»

๓.^

74.250

49.702

.810

83.5๓

I280x^

Subtitle Setting

๓.020

108.^

1280x1024

๓.981

135.^

12๓x1024

79.976

75.025

1366 x 768

47.712

59.7๓

85.1

1๓.^

1440x9๓

55-๓5

59.๓7

You can Change the audio

language if the video has

тоГе than one language.

1K»X^»RS

๓,0๓

๓.^

1๓.0๓

Audio Language

65.2๓

59.954

146.2๓

11x10๓

TV size in

Inches

VESA screw hole specs

(A*B)in millimeters

Standard

Screw

๓.0๓

148.Κ»

Product

Family

1920x10๓

67.5๓

Quantity

Stop Slide Show ‫مث‬

Start Slide Show

You can start or stop a

Slide Show.

Troubleshootini

19-22

75Χ75

If the TV seems to have a problem, fi rst review this list of possible problems and solution. If none of these troubleshooting tips apply, visit

samsung.com, then click on Support, or call Samsung customer sen/ice at 1-900-SAMSUNG.

You can sel^t the slide

show speed during the

slide show.

100X100

Slide Show Speed

LED-^

32-40

2๓X200

Μ6

You can set and select

backg¡r.

,'Ound ^usic whe

Possible Solirtion

Problem

Μ8

46-๓

400X4๓

inga SlldShoW

Background Music

If your Samsung Television is fl ickering or dimming sporadical^, you may need to disable some of its energy, efficient

features like the Eco Sensor or the ЕПегду Saving"feature. Follow the steps below with your remote to turn these

features off or on.

٠ Energy saving : Menu

Setup Ч Eco Solution -♦ Energy Saving * Select Settings

Flickering and Dimming

You can z^m into images

in ffjll scr^n mode.

Zoom

Do not install your Wall Mount Kit while

your TV is turned on. It may result in

personal ¡njuty due to electric shock.

ằ

You can rotate images in

full screen mode.

Rotate

If you fi nd that the color on your Samsung television's screen is not correct or black and white, first ณท a Self

Diagnosis Test on.the TV to make sure there are no device issues.

٠ Self Diagnosis : User Menu ٠ Support _♦ Self Diagnosis -» Picture Test

« If the test is ok, t^ making sure :

٠ Your connections are all consistent. For example, if you've used the AV In jack on your TV, make sure you have

used the AV Out jack on your video source.

٠ T^ making sure you have connected to the correct Jacks. For example, if you use the Component jacks, labeled

Pb. Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb Jack on the

video source to the blue Pb jack on the TV. the red Prjack on the source to the red Prjack on the TV.

Component Connections ‫مل‬

Screen Color

You can see detailed

information about the

played file.

Infomation

Securing the ^ to the Wall

Settings

Using the Setup Menu

!n،ormat!on: Se.ee، ،0 view information about the connected USB

device.

Cautfon: Puffing, pushfng. or effmbing onto the TV

may cause the TV to faff, fn partfoufar. ensure that your

chffdren do not hang over or destabffize the TV; dofng

so may cause the TV to tip over, resuftfng fn serfous

injuries or death. Foffow aff safety precautfons provided

on the fnefuded Safety F^er. For added stabifity, fnstaff

ttie anti-faff device for safety pufposes, as follows.

To prevent the TV from falling

Since the necessary brackets, screws, and string or cable are

not supplied, please purchase these separately.

1. Insert the screws into the wall brackets and firmly fasten them to

the wall. Make sure the screws are fi rmly fixed to the wall.

We strongly recommend you drive the screws into a stud.

2. Using screws, insert the screws through the TV brackets, and then

fasten the screws to ttie top VESA screw holes on the back ot the

If you find that the colors on your Samsung ‫ آل‬are corr^t but justalittle too dark or bright, there are some settings

you should check before calling for a repair.

٠ Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go to "Picture" in the Menu, and then try

adjusting these options.

Screen Brightness

,III

other Information

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on

the wall.

[

For detailed information about installing the wall mount, see the

instructions provided with the wall mount ‫؛‬terns. Contact a technician

for assistance when installing the wall mount bracket. Samsung

Electronics is not responsible for any damage to the product or injuty

to yourself or others if you choose to install the wall mount on your

own.

Wa!! Mount Kit Specifications fi^ESA)

The wall mount kit Js not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the floor. When

attaching to other building materials, please contact your nearest

dealer. If you install the ^ on a ceiling or slanted wall, Jt may fall and

result in severe personal injuty.

If your Samsung TV appears to turn off by rtself. there may be an issue with either your Timer settings or your Eco

friendly No Signal Power Off feature.

First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fall asleep with the TV still on

knowing that it will turn off after a certain period of time and not waste energy.

٠ Steep Timer : User Menu » Setup - Time -» Sleep Timer

If the Sleep Timer ¡S not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.

٠ No Signal Power Off : User Menu -» Setup -» Eco Solution Ц No Signal Power

٠ Auto Power Off : User Menu ‫ ب‬Setup -» Eco Solution ٠ Auto Power Off

Unwanted Powering off

Before you turn the ^١ on, find the red light on t‫؛‬e right or l e ft bottom of your w. Press the power on

button on the

TV or remote and the light should blink about 5 times before the TV turns on.

If you find that you are having trouble powering on your Samsung television, there are a number of things to check it

before making a call to the senrice department.

« If you happen to be using the,^asamontor and the stand-by l¡g١tonlyblin‫؛‬sforafew^ndswh‫؛‬n‫؛‬ou^re٥

the power bitten, yCUi PC is in sl‫؛‬ep mode. To take your PC out of sl^p mode, press a key on your keyboard or

mo‫؛‬e the mouse. Then try turning yOur TV on.

If you're sure your power cord, remote control, and PC are ft‫ل‬ทct‫ا‬on‫؛‬ng property, you may be having a cable ìssụe. If

yOu have a cable Or satellite box, your TV may appear to. be off becauSe the саЫе_ог satellite box IS noţ outputting a

Si g nal . To test the signal output of your cable or satellit‫ ؟‬box. press theg۴deor‫؛‬nfo¿jtton^n¿hecable or satellite

box remotecontroT. If thesereen displays the guide or info data, the problem i s caused by the box.

Trouble Powering On

-^٠

3. Connect the brackets on the TV and the brackets on the wall with

a strong string or cable, and then tie the string or cable tightly to

the brackets.

Verify all connections are properly secured. Periodically check

the connections for any sign of fatigue or failure. If you have

any doubt about the security of your connections, contact a

professional installer.

Install the TV close to the wall so that it does not fall.

Connect the string or cable so that the brackets on the wall are

at the same height or lower than the brackets on the TV. Untie

the string or cable before moving the TV.

To purchase a TV Holder kit, contact Samsung customer care.

« If you have any trouble assembling the stand, referto "Install the stand" In the Start Up or stand Installation Guide.

« Re-run Plug & Play or run Auto Program, (go to MENU - Channel ٠ Auto ProgramJ

Stand Assembly

Cannot find a channel