Samsung 5 Series Panduan Pengguna - Halaman 7

Halaman Cetak

■ Information: Display the information for a show or channel you have

scheduled. You can also change the schedule Information.

1. Select the Programmed List icon on the left side of the Channel

List screen, and then press the ENTERE button.

2. On the Programmed List screen, select the show or channel entry

you want information for, and then press the

Tools Menu appears.

3. Select Information, and then press the ENTERE button. The

Timer Viewing Info screen appears.

4. Select Change Info and press the ENTERE button to change

information, or select Close and press the ENTERE button to

close the Information screen.

■ Select All / Deselect All: You can select or deselect all channels in

the channel list.

❑ Other Channel Menu Functions

Channel Mode

Lets you select the channel list displayed when you press the

(Channel) button on your remote. For example, if you select Favorite

Channels, you will only see Favorite channels when you press the

button.

<CH>

Fine Tune

Analog channels only.

If the reception is clear, you do not have to ﬁne tune the channel, as

this is done automatically during the search and store operation. If the

signal is weak or distorted, ﬁne tune the channel manually.

✎

Select the channel, and then select Fine Tune.

✎

Fine tuned channels that have been saved are marked with an

asterisk "*" on the right-hand side of the channel number in the

channel banner.

✎

To reset fine-tuning, select the channel, select Fine Tune, and then

select Reset on the Fine Tune screen.

Setup Menu

Plug & Play

Lets you re-run the Plug & Play initial setup procedure.

Language

Set the menu language.

✎

Choose between English, Español, and Français.

❑ Setting the Time

Time

✎

The time you set will appear when you press the

■ Clock: Set the clock so you can use the various timer features of

the TV.

✎

If you disconnect the power cord, you have to set the clock again.

TOOLS

button. The

<CH>

button.

INFO

- 6 -

To set the clock, follow these steps:

1. Select Setup >Time > Clock.

2. Press ENTERE and select Auto or Manual, and then press

ENTERE again.

If you selected Auto:

The TV will automatically download the correct time from a digital

channel.

y Select Time Zone, and then press the ENTERE button. Use

the▲/▼ buttons to select your Time Zone, and then press

ENTERE.

y Select DST (Daylight Savings Time), and then press ENTERE.

Select On if you want to turn the DST adjustment on and off

manually. Select Off to turn off the DST adjustment. Select Auto if

you want the TV to adjust to DST automatically. Press ENTERE

when done.

✎

DST and Time Zone function are only available when the Clock

Mode is set to Auto.

If you selected Manual:

The Clock Set screen appears. Use the ▲/▼ buttons to change the

values in each ﬁeld or use the number buttons to enter the values

directly. Use the ◄/► buttons to move from ﬁeld to ﬁeld. When done

with all the ﬁelds, press ENTERE.

✎

Available only when Clock Mode is set to Manual.

■ Sleep Timer t

Automatically shuts off the TV after a preset period of time. (30, 60,

90, 120, 150 and 180 minutes).

✎

To cancel the Sleep Timer, select Off.

Timer 1 / Timer 2 / Timer 3

Turns the TV on and off automatically at times and days you select. You

can set three different on/off timer settings.

✎

You must set the clock first.

■ On Time / Off Time: Set the hour, minute, am/pm, and Activate/

Inactivate ﬁelds for On Time and Off Time. Use the ◄/► buttons to

move from ﬁeld to ﬁeld. Use the ▲/▼ buttons to change the values

in each ﬁeld. To activate the timer with the setting you have chosen,

set the Activate/Inactivate ﬁeld to Activate.

■ Volume: Set the desired loudness.

■ Contents: To select what will be turned on when the timer setting is

activated. You can set the TV to turn on a speciﬁc channel or play

back contents such as photo or audio ﬁles. Use the ◄/► buttons to

move to the Contents ﬁeld, and then press the ENTERE button.

The Contents screen appears. Use the ◄/► buttons to move from

ﬁeld to ﬁeld. Use the ▲/▼ buttons to change the values in each ﬁeld.

- TV/USB: Select TV or USB. The USB device must be connected

to your TV before you can select USB.

- Antenna: Displays the current antenna source, Air or Cable.

- Channel: If you have selected TV, select the desired channel.

- Music/Photo: If you have selected USB, follow these steps to

select a folder containing MP3 (Music) or JPEG (Photo) ﬁles on the

USB device:

✎

The maximum number of files the TV can display, including sub

folders, in one folder of a USB storage device is 2000.

✎

The media may not play smoothly if you use a USB device rated

lower than USB 2.0.

1. Use the ◄/► buttons to move to the ﬁeld under Music or the

ﬁeld under Photo, and then press the ENTERE button. The TV

displays a single folder (the Root folder) and the type or name of the

device.