Samsung 5003 Series Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Samsung 5003 Series. Samsung 5003 Series 2 halaman. 5100 series 5
Juga untuk Samsung 5003 Series: Panduan Pengguna (35 halaman), Panduan Pengguna (2 halaman), Panduan Pengguna (49 halaman), Panduan Pengguna (2 halaman), Panduan Pengguna (2 halaman), Panduan Pengguna (2 halaman), Panduan Pengguna (2 halaman), Panduan Pengguna (2 halaman), Panduan Pengguna (2 halaman), Panduan Pengguna (2 halaman), Panduan Pengguna (2 halaman)
Halaman Cetak
2. Press the ▲ or ▼ button to select Media Play (USB), then press
Support Menu
the ENTERE button.
3. Press the ◄ or ► button to select an icon (Videos, Music,
Self Diagnosis
Photos, Settings), then press the ENTERE button.
✎
■ Picture Test: Use to check for picture problems. If the problem
It might not work properly with unlicensed multimedia files.
continues to occur, check the color pattern.
✎
Need-to-Know List before using Media Play (USB)
■ Sound Test: Use the built-in melody sound to check for sound
x
The file system supports FAT16, FAT32 and NTFS.
problems.
x
Certain types of USB Digital camera and audio devices may not
■ Signal Strength: (digital channels only) An HD channel's reception
be compatible with this TV.
quality is either perfect or the channels are unavailable. Adjust
x
Media Play only supports USB Mass Storage Class (MSC)
your antenna to increase signal strength.
devices. MSC is a Mass Storage Class Bulk-Only Transport
■ Reset: Reset all settings to the factory defaults.
device. Examples of MSC are Flash Card Readers. Devices
should be connected directly to the TV's USB port. USB HDD is
✎
The PIN input screen appears before the setup screen.
not supported.
✎
Enter your 4-digit PIN. Change the PIN using the Change
x
Before connecting your device to the TV, please back up your
PIN option.
files to prevent them from damage or loss of data. SAMSUNG is
not responsible for any data file damage or data loss.
Software Upgrade
x
A USB device that requires high power (more than 0.5A) may not
be supported.
Software Upgrade can be performed by downloading the latest
x
Do not disconnect the USB device while it is loading.
firmware from samsung.com to a USB memory device.
x
The higher the resolution of the image, the longer it takes to
HD Connection Guide
display on the screen.
x
The maximum supported JPEG resolution is 15,360 x 8,704
Refer to this information when connecting external devices to the TV.
pixels.
x
If a file is corrupted or the TV does not support the file type, the
Contact Samsung
"Not Supported File Format" message appears.
x
The TV cannot play MP3 files with DRM that have been
View this information when your TV does not work properly or
POWER
P
downloaded from a for-pay site. Digital Rights Management
when you want to upgrade the software. You can find information
(DRM) is a technology that supports the creation, distribution,
regarding our call centers and how to download products and
and management of digital content in an integrated and
software.
comprehensive way, including protecting the rights and interests
of content providers, preventing illegal copying of contents, and
managing billings and settlements.
x
PTP device is not supported.
Media Play
x
If the device is over-powered while connecting or using a USB
device, the device may not be recognized or may malfunction.
Enjoy photos, music and/or movie files saved on a
x
If the TV has no input during the time set in Auto Protection
USB Mass Storage Class (MSC) device.
MEDIA.P
Time, the Screensaver will run.
x
The power-saving mode of some external hard disk drives may
be released automatically when your connect them to the TV.
x
If you use a USB extension cable, the TV may not recognize the
USB device or may not be able to read the files on the device.
❑ Connecting a USB Device
x
If a USB device connected to the TV is not recognized, the list of
files on the device is corrupted, or a file in the list is not played,
1. Turn on your TV.
connect the USB device to a PC, format the device, and check
the connection.
2. Connect a USB device containing photo, music and/or movie files
x
If a file you deleted from the PC is still found when you run Media
to the USB jack on the side of the TV.
Play, use the "Empty the Recycle Bin" function on the PC to
3. When USB is connected to the TV, you can select Media Play
permanently delete the file.
(USB) in Application menu.
x
Photos only supports sequential jpeg format.
x
The scene search and thumbnail functions are not supported in
the Videos.
❑ Using the Media Play Menu
x
If the number of files and folders saved on a USB storage device
is approximately over 4000, the files and folders may not appear
Media Play
and some folders may not be opened.
x
The maximum displayed number of files, including sub folders, in
one folder of USB storage device is 2000.
Videos
x
The media may not be playing smoothly when using the device
lower than USB 2.0.
▒ Change Device
SUM
E Enter
R Return
1. Press the
MENU
button. Press the ▲ or ▼ button to select
Application, then press the ENTERE button.
- 9 -
Troubleshooting
If the TV seems to have a problem, first review this list of possible problems and solution. If none of these troubleshooting tips apply, visit
samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
Problem
Possible Solution
Flickering and Dimming
If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient
features like the Eco Sensor or the Energy Saving feature. If you follow below step with your remote, you can turn
these features off or on.
y Energy saving : User Menu → Setup → Eco Solution → Energy Saving
Component Connections /
If you find that the color on your Samsung television's screen is not correct or black and White, first run a Self
Screen Color
Diagnosis on the TV to make sure there are no device issues.
y Self Diagnosis : User Menu → Support → Self Diagnosis → Picture Test
y If the test is ok, try making sure ;
y Your connections are all consistent. For example, if you've used the AV In jack on your TV, make sure you have
used the AV Out jack on your video source.
y Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled
Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the
video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.
Screen Brightness
If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings
you should check before calling for a repair.
y Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go in to "Picture" on user Menu then try
adjusting options mentioned above.
Unwanted Powering off
If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco
friendly No Signal Power Off feature.
First make sure you Sleep Timer is not accidentally set. The sleep timer allows you the comfort of falling asleep with
the TV still on but, turns it off after a certain period of time so as not to waste energy.
y Sleep Timer : User Menu → Setup → Time → Sleep Timer
If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.
y No Signal Power Off : User Menu → Setup → Eco Solution → No Signal Power
y Auto Power Off : User Menu → Setup → Eco Solution → Auto Power Off
Trouble Powering On
Before Turn on check red light on the right or left bottom of your TV. Press power on button on TV or remote
and it will blink about 5 times before turning on.
If you find that you are having trouble powering on your Samsung television, there are a number of things to check
before making a call to the service department.
y If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you
press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your
keyboard or move the mouse. Then try turning your TV on.
If you're sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If
you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a
signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite
box remote control. If the screen displays the guide or info data, the problem is caused by the box.
Stand Assembly
• If you have any trouble to assemble the stand though you refer to "Install the Stand" mentioned at separate guide.
Cannot find channel
• Re-run plug and play.
Poor picture
First, perform the Picture Test and to see if your TV is properly displaying the test image.
Go to
MENU
- Support - Self Diagnosis - Picture Test
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The TV image does not look as good as
• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to
it did in the store.
deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD channels from the channel line up.
• Air/Cable Antenna connection: Try HD channels after performing Auto program.
✎
Many HD channels are up scaled from SD(Standard Definition) contents.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
The picture is distorted: macroblock
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports
error, small block, dots, pixelization.
and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.
Color is wrong or missing.
• If you're using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause color problems or a blank screen.
There is poor color or brightness.
• Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)
• Adjust Energy Saving option in the TV menu. (go to
MENU
- Setup - Eco Solution - Energy Saving )
• Try resetting the picture to view the default picture setting. (go to
MENU
- Picture - Picture Reset)
- 13 -
[UE4003-ZC]BN68-04466A-ENG.indd 2
Videos
File
Container Video Codec Resolution
Extension
►
DivX 3.11 / 4.x
Movie 01.avi
00:04:03 / 00:07:38
1/1
1920x1080 6~30
/5.1 / 6.0
MPEG4 SP
*.asf
ASF
1920x1080 6~30
/ ASP
*.wmv
H.264
1920x1080 6~30
MPEG2
1920x1080 6~30
*.ts
*.trp
TS
*.tp
H. 264 BP / MP
1920x1080 6~30
/ HP
*.m2ts
E Pause L Jump T Tools R Return
MPEG1
1920x1080 24/25/30
*.dat
1. Press the ◄ or ► button to select Videos, then press the
*.mpg
MPEG2
1920x1080 24/25/30
PS
ENTERE button in the Media Play menu.
*.mpeg
H. 264 BP / MP
*.vob
1920x1080 6~30
/ HP
2. Press the ◄/►/▲/▼ button to select the desired video in the file
MPEG4 SP
1920x1080 6~30
list.
/ ASP
*.3gp
3GPP
H.264
1920x1080 6~30
3. Press the ENTERE button or � (Play) button.
H.264
1920x1080 6~30
*.flv
flash
-
The selected file is displayed on the top with its playing time.
*.swf
formats
Sorenson H.263 1920x1080 6~30
-
If video time information is unknown, playing time and the
Other Restrictions
progress bar are not displayed.
-
During video playback, you can search using the ◄ and ►
y Video content will not play, or not play correctly, if there is an error in the
content or the container.
button.
y Sound or video may not work if the contents have a standard bit rate/
✎
In this mode, you can play movie clips contained in a game, but
frame rate above the compatible Frame/sec listed in the table above.
you cannot play the game itself.
y If the Index Table is in error, the Seek (Jump) function is not supported.
y Supported Subtitle Formats
y The menu may take longer to appear if the video's bit rate exceeds
-
External
10Mbps.
y Video content can not be played, if there are many contents in one file.
Name
File extension
MPEG-4 timed text
.ttxt
Video Decoder
SAMI
.smi
SubRip
.srt
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not
SubViewer
.sub
supported.
Micro DVD
.sub or .txt
MPEG4 SP, ASP :
SubStation Alpha
.ssa
– Below 1280 x 720: 60 frame max
Advanced SubStation Alpha
.ass
– Above 1280 x 720: 30 frame max
-
H.263 is not supported.
Internal
GMC is not support.
Name
Container
Format
Audio Decoder
Xsub
AVI
Picture Format
SubStation Alpha
MKV
Text Format
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
Advanced SubStation Alpha
MKV
Text Format
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode
of WMA Pro is not supported)
SubRip
MKV
Text Format
WMA Lossless is not supported.
MPEG-4 Timed text
MP4
Text Format
Music
y Supported Video Formats
File
Frame
Bit
Audio
Container Video Codec Resolution
Extension
rate(fps)
rate(Mbps)
Codec
Playlist
3/15
DivX
I Love You
I Love you
1920x1080 6~30
30Mbps
Jhon
Jhon
3.11/4.x/5.1/6.0
Music 1
MP3 /
1st Album
No Singer
H264
1920x1080 6~30
30Mbps
Pop
*.mp4
MP4
ADPCM /
Music 2
2010
AAC
4.2MB
No Singer
AVC
1920x1080 6~30
30Mbps
Music 3
No Singer
MJPEG
640x480
6~30
10Mbps
01:10 / 04:02
Music 4
No Singer
DivX
1920x1080 6~30
30Mbps
Music 5
3.11/4.x/5.1/6.0
MP3 /
No Singer
AC3 /
MPEG4 SP
*.avi
AVI,
1920x1080 6~30
30Mbps
SUM
E Pause L Jump T Tools R Return
/ ASP
LPCM /
*.mkv
MKV
ADPCM /
H264
1920x1080 6~30
30Mbps
DTS Core
1. Press the ◄ or ► button to select Music, then press the
MJPEG
640x480
6~30
10Mbps
ENTERE button in the Media Play menu.
- 10 -
Problem
Possible Solution
There is a dotted line on the edge of
• If the picture size is set to Screen Fit, change it to 16:9.
the screen.
• Change cable/satellite box resolution.
The picture is black and white.
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1
on the TV.
When changing channels, the picture
• If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box reboots. It
freezes or is distorted or delayed.
may take up to 20 minutes)
• Set output resolution of the cable box to 1080i or 720p.
Sound Problem
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
(go to
MENU
- Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too
• Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.
low at maximum volume.
The picture is good but there is no
• If you are using an external device, check the device's audio output option (ex. you may need to change your
sound.
cable box's audio option to HDMI when you have a HDMI connected to your TV).
• Reboot the connected device by reconnecting the device's power cable.
The speakers are making an
• Check the cable connections. Make sure a video cable is not connected to an audio input.
inappropriate noise.
• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
• Perform the Sound Test as explained above.
No Picture, No Video
The TV will not turn on.
• Make sure the AC power cord is securely plugged into the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the
POWER
button on the TV to make sure the problem is not the remote.
If the TV turns on, refer to 'Remote control does not work' below.
The TV turns off automatically.
• Ensure the Sleep Timer is set to Off in the Time menu.
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes
if there is no signal.
There is no picture/video.
• Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).
• Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV
input. For example, if an external device's output is HDMI, it should be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV's correct source by pressing the
SOURCE
button on the remote control.
• Reboot the connected device by reconnecting the device's power cable.
Antenna(Air / Cable) Connection
The TV is not receiving all channels.
• Make sure the coaxial cable is connected securely.
• Please try Auto Program to add available channels to the channel list.
go to
MENU
- Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set
in the menu. There are 3 options. (STD, HRC and IRC)
• Verify the antenna is positioned correctly.
No Caption on digital channels.
• Check the Caption Setup menu. Try changing Caption Mode Service 1 to CC1.
• Some channels may not have caption data.
The picture is distorted: macroblock,
• Compression of video contents may cause picture distortion. Especially on fast moving pictures such as sports
error, small block, dots, pixelization.
and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
Others
Purple/green rolling horizontal bars and
• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-
buzzing noise from the TV speakers with
top-box has a grounding issue. Replace the Component video cables with an HDMI connection.
Component cable connection.
The picture will not display in full screen.
• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
• Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.
• Adjust the picture size option on your external device or change the TV to full screen.
The remote control does not work.
• Replace the remote control batteries with correct polarity (+/–).
• Clean the transmission window located on the top of the remote control.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for
does not turn the TV on or off, or adjust
the SAMSUNG TV code.
the volume.
A "Mode Not Supported" message
• Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to
appears.
resolution settings in this manual.
- 14-
2. Press the ◄/►/▲/▼ button to select the desired Music in the file
■ Playing the video/music/photo file group
Frame
Bit
Audio
list.
rate(fps)
rate(Mbps)
Codec
1. While a file list is displayed, move to any file in desired group.
MP3 /
3. Press the ENTERE button or � (Play) button.
30Mbps
2. Press the
AC3 /
LPCM /
✎
During music playback, you can search using the ◄ and ►
30Mbps
ADPCM
button.
Media Play - Additional Functions
/ WMA
/ WMA
✎
30Mbps
� (REW) and μ (FF) buttons do not function during play.
■ Videos/Music/Photos Play Option menus
Pro
✎
AC3 /
Only displays the files with MP3 and PCM file extension. Other
When playing a file, press the
30Mbps
AAC /
file extensions are not displayed, even if they are saved on the
MP3 /
same USB device.
30Mbps
DD+ /
Category
HE-AAC
✎
If the sound is abnormal when playing MP3 files, adjust the
Title
30Mbps
AC3 /
Equalizer in the Sound menu. (An over-modulated MP3 file
MPEG /
30Mbps
may cause a sound problem.)
LPCM /
Repeat Mode
30Mbps
AAC
Photos
Picture Size
30Mbps
MP3
30Mbps
Normal
Image1024.jpg
1024x768
2011/10/24
3/15
Picture Mode
30Mbps
MP3
30Mbps
Sound Mode
Subtile Setting
Audio Language
E Pause L Previous/Next T Tools R Return
1. Press the ◄ or ► button to select Photos, then press the
Stop Slide Show /
ENTERE button in the Media Play menu.
Start Slide Show
2. Press the ◄/►/▲/▼ button to select the desired photo in the file
Slide Show Speed
list.
3. Press the ENTERE button or � (Play) button.
Background Music
✎
NOTE
Zoom
x
While a photo list is displayed, press the � (Play) / ENTERE
button on the remote control to start the slide show.
Rotate
x
All files in the file list section will be displayed in the slide show.
x
During the slide show, files are displayed in order.
Information
x
During the slide show, you can adjust the slide show speed using
(π) (REW) or (µ) (FF) button.
Settings
x
You can move to other file using ◄ or ► button.
y Supported Photo Formats
Using the Setup Menu
■ Information: Select to view information on the connected device.
Image
Photo
Resolution
Base-line
15360 x 8704
JPEG
Progressive
1024 x 768
Other Information
Other Restrictions
y CMYK, YCCK Color space JPEG are not supported.
Installing the Wall Mount Kit
Playing Multiple Files
The wall mount kit (sold separately) allows you to mount the TV on
the wall.
■ Playing selected video/music/photo files
For detailed information on installing the wall mount, see the
1. Press the Yellow button in the file list to select the desired file.
instructions provided with the wall mount items. Contact a technician
2. Repeat the above operation to select multiple files.
for assistance when installing the wall mount bracket. Samsung
Electronics is not responsible for any damage to the product or injury
✎
NOTE
to yourself or others if you elect to install the wall mount on your own.
x
The c mark appears to the left of the selected files.
Wall Mount Kit Specifications (VESA)
x
To cancel a selection, press the Yellow button again.
✎
x
The wall mount kit is not supplied, but sold separately.
To deselect all selected files, press the
TOOLS
button and select
Deselect All.
Install your wall mount on a solid wall perpendicular to the floor. When
attaching to other building materials, please contact your nearest
3. Press the
TOOLS
button, and then select Play Selected
dealer. If you install the TV on a ceiling or slanted wall, it may fall and
Contents.
result in severe personal injury.
- 11 -
Problem
Possible Solution
Caption on the TV menu is greyed out.
• You cannot select Caption in the TV menu when watching content from a device connected via HDMI or
Component.
• Caption must be activated on the external device.
There is a plastic smell from the TV.
• This smell is normal and will dissipate over time.
TV Signal Strength is unavailable in the
• This function is only available for digital channels from an Antenna / RF/Coax connection.
Self Diagnosis Test menu.
TV is tilted to the right or left side.
• Remove the stand base from the TV and reassemble it.
The Channel menu is grey out
• The Channel menu is only available when you select the TV source.
(unavailable).
Your settings are lost after 30 minutes or
• If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from
every time the TV is turned off.
Store Demo mode to Home Use mode using the Plug & Play procedure. Press the
TV mode, go to
MENU
→ Setup → Plug & Play → ENTERE.
You have intermittent loss of audio or
• Check the cable connections and reconnect them.
video.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
You see small particles when you look
• This is part of the product's design and is not a defect.
closely at the edge of the frame of
the TV.
POP (TV's internal banner ad) appears
• Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).
on the screen.
✎
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark
pixels on the screen. These pixels will have no impact on the performance of the product.
✎
Watch these troubleshooting on video at www.samsung.com/spsn.
✎
Some functions and pictures shown in this manual are available on specific models only.
✎
You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.
Storage and Maintenance
✎
If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.
✎
The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent
scratches.
Do not spray water directly onto the product.
Any liquid that goes into the product may
cause a failure, fire, or electric shock.
License
To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.
TheaterSound, SRS and the
symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under licence from SRS Labs, Inc.
■ This product uses some software programs which are distributed under the Independent JPEG
Group.
SRS TheaterSound™ provides the most immersive surround sound experience from the TVs built-in
speakers, while maintaining steady volume and delivering rich bass and clear dialog.
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
DivX Certified® to play DivX® video up to HD 1080p, including premium
content.
Copyright (c) 1995-2008 International Business Machines Corporation and others All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi
associated documentation files (the "Software"), to deal in the Software without restriction, including
Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx. com for more
without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the
information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND:
Software, and to permit persons to whom the Software is furnished to do so, provided that the above
This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD)
copyright notice(s) and this permission notice appear in all copies of the Software and that both the
movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go
above copyright notice(s) and this permission notice appear in supporting documentation.
to vod. divx.com for more information on how to complete your registration. Covered by one or more of
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX Certified® and
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT
SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR
Manufactured under license from Dolby Laboratories. Dolby and the
ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
double-D symbol are trademarks of Dolby Laboratories.
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or
Symbol, & DTS and the Symbol together are registered trademarks & DTS
otherwise to promote the sale, use or other dealings in this Software without prior written authorization
2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS,
of the copyright holder.
Inc. All Rights Reserved.
All trademarks and registered trademarks mentioned herein are the property of their respective owners.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.
com) Open Source License Notice is written only English.
- 15 -
✎
NOTE
x
Standard dimensions for wall mount kits are shown in the table
below.
TOOLS
button, and then select Play Folder.
x
When purchasing our wall mount kit, a detailed installation
manual and all parts necessary for assembly are provided.
x
Do not use screws that do not comply with the VESA standard
screw specifications.
x
button.
Do not use screws that are longer than the standard dimension
TOOLS
or do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the
Operation
Videos
Music
Photos
TV set.
You can move the other file
x
c
For wall mounts that do not comply with the VESA standard
directly.
screw specifications, the length of the screws may differ
You can play movie and music
depending on the wall mount specifications.
c
c
files repeatedly.
x
Do not fasten the screws too firmly. This may damage the
You can adjust the picture size to
product or cause the product to fall, leading to personal injury.
c
your preference.
Samsung is not liable for these kinds of accidents.
You can adjust the picture
x
c
c
Samsung is not liable for product damage or personal injury
setting.
when a non-VESA or non-specified wall mount is used or the
You can adjust the sound
consumer fails to follow the product installation instructions.
c
c
c
setting.
x
Do not mount the TV at more than a 15 degree tilt.
You can play the video with
x
Always have two people mount the TV on a wall.
Subtitles. This function only
c
works if the subtitles are the
same file name as the video.
Product
TV size in
VESA screw hole specs
Standard
Family
inches
(A * B) in millimeters
Screw
You can change the audio
language if the video has more
c
19~22
75 X 75
than one language.
M4
26
100 X 100
You can start or stop a Slide
LED-TV
c
Show.
32~40
200 X 200
M6
You can select the slide show
46~60
400 X 400
M8
c
speed during the slide show.
You can set and select
c
background music when
Do not install your Wall Mount Kit while
watching a Slide Show.
your TV is turned on. It may result in
You can zoom into images in full
c
personal injury due to electric shock.
screen mode.
You can rotate images in full
c
screen mode.
Securing the TV to the Wall
You can see detailed information
c
c
c
about the played file.
Caution: Pulling, pushing, or climbing onto the TV
may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing
so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided
on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To prevent the TV from falling
✎
Since the necessary clamps, screws, and string are not
supplied, please purchase these additionally.
1. Drive the screws into the clamps and firmly fasten them onto the
wall. Make sure the screws are firmly fixed into the wall.
2. Remove the screws from the back center of the TV, put the
screws into the clamps, and then fasten the screws onto the TV
again.
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a strong cable and then tie the string tightly.
✎
Verify all connections are properly secured. Periodically check
the connections for any sign of fatigue or failure. If you have
any doubt about the security of your connections, contact a
professional installer.
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Model Name
UN22ES4003
Display Resolution
Screen Size
22" Class
(Diagonal)
(21.5" measured diagonally)
SOURCE
button to select
Sound
Output
3W x 2
Dimensions (W x H x D)
20.4 X 12.5 X 1.9 inches
Body
(518.9 X 319.7 X 49.0 (mm))
With stand
20.4 X 13.9 X 4.8 inches
(518.9 X 354.1 X 123.4 (mm))
Weight
Without Stand
7.0 Ibs (3.2 kg)
With Stand
7.2 Ibs (3.3 kg)
✎
Design and specifications are subject to change without prior notice.
✎
This device is a Class B digital apparatus.
✎
For information about the power required and more about power consumption, refer to the label attached to the product.
✎
Typical power consumption is measured according to Energy Star Program requirements for televisions.
■ JACK PANEL DETAIL / REAR VIEW
UN22ES4003
2
Clean the product with a soft cloth dampened
2
with in a small amount of water. Do not use a
3
1
flammable liquid (e.g. benzene, thinners) or a
3
1
cleaning agent.
4
7
4
7
6
5
6
5
UN32EH4003 / UN39EH5003
1
2
1
2
3
4
3
7
4
7
5
6
5
6
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to
change without prior notice. Refer to the dimensions prior to performing installation of
your TV. Not responsible for typographical or printed errors.
© 2012 Samsung Electronics America, Inc
✎
Install the TV close to the wall so that it does not fall.
✎
It is safe to connect the string so that the clamps fixed on the
wall are equal to or lower than the clamps fixed on the TV.
Untie the string before moving the TV.
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device
used to physically fix the system when using it in a public place.
Refer to the manual provided with the Kensington Lock for additional
information on proper use.
✎
Please find a "K" icon on the rear of the TV. The Kensington
slot is beside the "K" icon.
✎
The position and color may differ depending on the model.
Assembling the Wire Holder stand
Quantity
Display Modes (HDMI/DVI Input)
Optimal resolution
4
4003 series:1366 x 768@60Hz / 5003 series: 1920 x 1080@60Hz
Horizontal
Vertical
Pixel Clock
Sync
1366 x
1920 x
Mode
Resolution
Frequency
Frequency
Frequency
Polarity
768
1080
(KHz)
(Hz)
(MHz)
(H / V)
640 x 350
31.469
70.086
25.175
+/-
c
c
IBM
720 x 400
31.469
70.087
28.322
-/+
c
c
640 x 480
35.000
66.667
30.240
-/-
c
c
MAC
832 x 624
49.726
74.551
57.284
-/-
c
c
1152 x 870
68.681
75.062
100.000
-/-
c
640 x 480
31.469
59.940
25.175
-/-
c
c
640 x 480
37.861
72.809
31.500
-/-
c
c
640 x 480
37.500
75.000
31.500
-/-
c
c
800 x 600
37.879
60.317
40.000
+/+
c
c
800 x 600
48.077
72.188
50.000
+/+
c
c
800 x 600
46.875
75.000
49.500
+/+
c
c
1024 x 768
48.363
60.004
65.000
-/-
c
c
1024 x 768
56.476
70.069
75.000
-/-
c
c
1024 x 768
60.023
75.029
78.750
+/+
c
c
VESA DMT
1152 x 864
67.500
75.000
108.000
+/+
c
1280 x 720
45.000
60.000
74.250
+/+
c
c
1280 x 800
49.702
59.810
83.500
-/+
c
1280 x 1024
63.981
60.020
108.000
+/+
c
1280 x 1024
79.976
75.025
135.000
+/+
c
1366 x 768
47.712
59.790
85.500
+/+
c
c
1440 x 900
55.935
59.887
106.500
-/+
c
1600 x 900RB
60.000
60.000
108.000
+/+
c
1680 x 1050
65.290
59.954
146.250
-/+
c
1920 x 1080
67.500
60.000
148.500
+/+
c
- 12 -
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C )
5% to 95%, non-condensing
UN32EH4003
UN39EH5003
1366 x 768
1920 x 1080
32" Class
39" Class
(31.5" measured diagonally)
(38.5" measured diagonally)
5W x 2
10W x 2
29.0 X 17.4 X 3.6 inches
35.2 X 20.9 X 3.6 inches
(738.4 X 444.0 X 93.2 (mm))
(895.9 X 532.5 X 93.2 (mm))
29.0 X 19.5 X 7.5 inches
35.2 X 23.2 X 8.9 inches
(738.4 X 497.7 X 191.7 (mm))
(895.9 X 589.3 X 227.6 (mm))
11.9 Ibs (5.4 kg)
17.1 Ibs (7.8 kg)
13.2 Ibs (6.0 kg)
21.6 Ibs (9.8 kg)
UN22ES4003
(Unit: inches)
8.7
1
2
2.9
2.9
3
4.3
4
2.2
5
9.1
6
6.4
7
UN32EH4003
(Unit: inches)
1
10.5
7.8
2
7.8
3
3.4
4
3.9
5
6
19.0
7.7
7
UN39EH5003
(Unit: inches)
1
13.6
7.8
2
7.8
3
5.2
4
5.6
5
23.5
6
10.7
7
- 16 -
2012-05-21
9:41:52