Epson 1815p - PowerLite XGA LCD Projector Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Proyektor Epson 1815p - PowerLite XGA LCD Projector. Epson 1815p - PowerLite XGA LCD Projector 27 halaman. Release of check tool for network projectors v1.00 for windows
Juga untuk Epson 1815p - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Panduan Pengoperasian (47 halaman), Pengaturan Cepat (2 halaman), Panduan Pengguna (1 halaman), Manual Fungsi (5 halaman), Manual Perangkat Lunak (2 halaman), Pernyataan Kesesuaian (4 halaman), Daftar Bagian (1 halaman), Buletin Dukungan Produk (45 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman)

Halaman Cetak

Epson 1815p - PowerLite XGA LCD Projector Panduan Pengguna

10.Click the AirPort icon on the menu bar at the top of the

Macintosh desktop. You see the AirPort status menu:

11.Check to make sure AirPort is turned on.

12.Select the name of your AirPort network.

Note: If you don't need the other network ports, disable them by

deselecting their checkboxes. If more than one network port is

enabled, the projector software warns you to turn off AirPort when

you first connect the projector. Disregard this message.

Your AirPort network and base station names may be different. To

check or change your AirPort network name, start the AirPort

Admin utility, select your base station, and click

, then make any changes you want on the AirPort

Show All Settings

tab.

If you're connecting to your projector in static IP mode, deselect the

checkbox. Make sure your projector's

Distribute IP addresses

gateway address is identical to the base station's IP address, and the

first three segments of the projector's IP address are identical to the

first three segments of the base station's IP address.

Projecting Over a Network

Once you've started EasyMP and set up your projector and

computer in either Ad Hoc (Quick) mode or Access Point

(Advanced) mode, follow these steps to start NS Connection

and project over the network.

1. Make sure you've set up your projector.

2. Windows: Select

EMP NS Connection

menu.

Mac OS X: Double-click the

your Applications folder.

. Click

Configure

from the Start

icon in

EMP NS Connection

3. The first time you start NS Connection, you see this dialog

box. Choose Quick Connection Mode and click

4. If you see a message asking you to disable the firewall make

an exception for the projector and allow projection. You see

the screen below. (If you have previously started NS

Connection, this may be the first screen you see.)

Select projector

If the connection is working properly, you see your projector

listed. If you don't see your projector listed, see "Solving

Connection Problems" on page 18. If you have additional

Epson projectors on the network, they are also listed along

with their status.

5. Once the name of your projector appears, select it and click

. If more than one projector is listed, you can select

Connect

additional ones and connect to them (up to four) at the same

time.

If the selected projector is already being used by another

person, you can still connect to it (unless it is "locked");

doing so automatically disconnects the other user. If a

projector is locked, you won't be able to connect to it when

it is in use.

3/08

PowerLite 1810p/1815p