Samsung 910B Panduan Servis - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Servis untuk Monitor Samsung 910B. Samsung 910B 43 halaman. Tft-lcd monitor

3 Disassembly and Reassembly

This section of the service manual describes the disassembly and reassembly procedures for the

MJ15AS*/MJ17AS*/MJ19AS*/MJ15BS*/MJ17BS*/MJ19BS*/MJ19ES* TFT-LCD monitors.

WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling

these components.

3-1 Disassembly

Cautions:

1. Disconnect the monitor from the power source before disassembly.

1. After placing monitor on the cushioned table,

remove two screws on the left and right of the

bottom.

2. Disconnect back cover from monitor after

grabbing the right edge of the set (

lifting the stand(

3. Remove 2 screws from the shield.

4. Disconnect function cable from the cover front

and lift up the panel. Remove 4 screws from

the panel shield. (Right / Left)

5. Lift up the panel shield and carefully remove

the silicon glue on the cables with a nipper.

Caution : Lamp wire may be easily damaged.

Please use caution when removing the silicon.

) and

3-1