Samsung 920WM - SyncMaster - 19" LCD Monitor Panduan Pemilik - Halaman 38

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Monitor Samsung 920WM - SyncMaster - 19" LCD Monitor. Samsung 920WM - SyncMaster - 19" LCD Monitor 48 halaman. Widescreen lcd monitors
Juga untuk Samsung 920WM - SyncMaster - 19" LCD Monitor: Spesifikasi (2 halaman)

Halaman Cetak

There are only 16

colors shown on the

screen.

The screen colors

have changed after

changing the video

card.

There is a message

that reads

"Unrecognized

monitor, Plug & Play

(VESA DDC) monitor

found".

Problems related to

Audio

Check the following items if there is trouble with the monitor.

1. Check if the power cord and the video cables are properly connected to the computer.

2. Check if the computer beeps more than 3 times when booting.

(If it does, request an after-service for the main board of the computer.)

3. If you installed a new video card or if you assembled the PC, check if the installed the adapter

(video) driver and the monitor driver.

4. Check if the scanning ratio of the video screen is set at 56 Hz ~ 60 Hz.

(Do not exceed 60 Hz when using the maximum resolution.)

5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode,

remove the Display Adapter at the " Control Panel → System → Device Administrator " and

then reboot the computer to reinstall the adapter (video) driver.

If problems repeatedly occur,

Q & A

Question

How can I change the

frequency?

How can I adjust the resolution?

Have the Windows colors been set

properly?

Has the video card been set

properly?

Have you installed the monitor

driver?

See the video card manual to see if

the Plug & Play (VESA DDC)

function can be supported.

No sound

Sound level is too low.

contact an authorized service

Frequency can be changed by reconfiguring the video card.

Note that video card support can vary, depending on the version

of the driver used. (Refer to the computer or the video card

manual for details.)

Windows ME/XP/2000 : Set the resolution at the Control

Panel→Display→Settings.

* Contact the video card manufacturer for details.

product.)

Windows ME/2000/XP:

Set the colors properly at the

Control Panel → Display →

Settings .

Set the video card by referring to the

video card manual.

Install the monitor driver according

to the

Driver Installation

Install the monitor driver according

to the

Driver Installation

Ensure that the audio cable is firmly

connected to both the audio-in port

on your monitor and the audio-out

port on your sound card.

(Refer to

Connecting the

Check the volume level.

If the volume is still too low after

turning the control to its maximum,

check the volume control on the

computer sound card or software

program.

center.

Answer

Instructions.

Monitor)