Siemens SSA911.01ZB Manual - Halaman 7

Jelajahi secara online atau unduh pdf Manual untuk Pengontrol Siemens SSA911.01ZB. Siemens SSA911.01ZB 13 halaman. Connected home radiator actuator zigbee
Juga untuk Siemens SSA911.01ZB: Panduan Cepat (2 halaman)

Halaman Cetak

Operation

HMI

The interface consists of an LCD display and three push

buttons.

Siemens

Smart Infrastructure

Lower temperature

Okay (for task confirmation; with LED)

Raise temperature

Press once

Press and hold

Press once

Press and hold

Press once

LED

Red

Blinking

Shining

Green

Blinking

Shining (5 s)

Press and hold together for 3 s

Press and hold together for 10 s

Buttons

Lower room temperature by 0.5 ℃.

Lower room temperature by 0.5 ℃ immediately, and lower by

another 0.5 ℃ every 0.5 s while button is pressed; or until the

lowest temperature is reached.

Raise room temperature by 0.5 ℃.

Raise room temperature by 0.5 ℃ immediately, and raise by

another 0.5 ℃ every 0.5 s while button is pressed; or until the

highest temperature is reached.

Perform the displayed function.

Update of controller software is being performed; no temperature

regulation possible.

Commissioning error.

Waiting for confirmation by user (used to start tasks).

Task successfully completed.

Activate or deactivate child safety lock.

After 10 s, a factory reset can be performed (display shows the

duration the buttons are pressed).

To perform the factory reset, the device must first be deleted from

the device list in the Connected Home app.

A6V12789814_en--_a

2022-02-14