Epson 410W - PowerLite WXGA LCD Projector Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Proyektor Epson 410W - PowerLite WXGA LCD Projector. Epson 410W - PowerLite WXGA LCD Projector 42 halaman. Remote control information
Juga untuk Epson 410W - PowerLite WXGA LCD Projector: Panduan Pengaturan Cepat (6 halaman), Panduan Pengoperasian (47 halaman), Panduan Pengguna (1 halaman), Spesifikasi (2 halaman), Pernyataan Kesesuaian (4 halaman), Panduan Pengguna (2 halaman), Daftar Bagian (1 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman), Buku Panduan Instalasi (5 halaman)

Halaman Cetak

Epson 410W - PowerLite WXGA LCD Projector Panduan Pengguna

Registering and deleting projectors for monitoring

Procedures for registration

Procedure

Select the projector(s) to be registerd from the displayed list,

and then click "Edit".

The following window will be displayed.

Make the necessary settings while referring to the following table.

Display name

Enter the name of the projector(s) to be

displayed in Grouping view or Detail list view.

Up to a maximum of 32 bytes can be entered. A

space cannot be used as the first character.

Display icon

Select the icon(s) to be displayed in Grouping

view or Detail list view.

Parent group

Select when registering a projector in a group.

If no groups have been created, this cannot be

selected. s "Registering several projectors to a

monitoring group all at once"

Projector

This shows the name that has been registered on

name

the projector.

IP address

This shows the IP address for the registered

projector.

Use Serial

This cannot be selected when registering

TCP/IP

projectors using automatic search.

conversion

adaptor.

Port Number

This cannot be selected when registering

projectors using automatic search.

Monitor

If a Monitor Password has been set for the

Password

projector, be sure to enter the Monitor Password

that has been set. If the correct password is not

entered at this time, it will not be possible to

monitor and control the projector even though it

is registered.

Description

You can enter some kind of memo about the

projector. The details you enter here will be

displayed at the projector properties.

Up to a maximum of 60 bytes can be entered.

Monitor

Select this when you want monitoring to start.

p.18