Epson 410W - PowerLite WXGA LCD Projector Buku Panduan Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Buku Panduan Instalasi untuk Proyektor Epson 410W - PowerLite WXGA LCD Projector. Epson 410W - PowerLite WXGA LCD Projector 5 halaman. Remote control information
Juga untuk Epson 410W - PowerLite WXGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengaturan Cepat (6 halaman), Panduan Pengoperasian (47 halaman), Panduan Pengguna (1 halaman), Spesifikasi (2 halaman), Pernyataan Kesesuaian (4 halaman), Panduan Pengguna (2 halaman), Daftar Bagian (1 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman)

Epson 410W - PowerLite WXGA LCD Projector Buku Panduan Instalasi
Epson PowerLite 410W

Replacing the Batteries

The remote control uses two AA alkaline batteries. Follow these steps
when you need to replace them:
1. Press in the tab to remove the battery cover.
2. Remove the old batteries, then insert the new ones as shown.
3. Replace the battery cover. (It should click into place.)
INSTALLATION HANDBOOK
Remote Control Information
note
The remote control
automatically shuts o when
it detects a button being
pressed more than
30 seconds. This conserves
battery life. It can be
helpful, for example, when
the remote is in a carrying
case and the P
Power
button is accidentally
pushed.
caution
When replacing batteries,
take the following
precautions:
Replace the batteries as
soon as they run out. If a
battery leaks, wipe away
battery uid with a soft
cloth. If uid gets on your
hands, wash them
immediately.
Do not expose batteries to
heat or ame.
Dispose of used batteries
according to local
regulations.
Remove the batteries if
you won't be using the
remote control for a long
period of time.
5