Cisco 522 Panduan Administrasi - Halaman 26
Jelajahi secara online atau unduh pdf Panduan Administrasi untuk Telepon IP Cisco 522. Cisco 522 48 halaman. Ip phones with multiplatform firmware
Juga untuk Cisco 522: Panduan Pengguna (46 halaman), Manual (40 halaman), Panduan Instalasi (39 halaman), Manual (24 halaman)
Halaman Cetak
Configure a Headset Template
Parameter
DECT Radio Range
Configure a Headset Template
Use this procedure to configure a headset template with customized settings that you can apply to Cisco
headsets. You can create a customized template or use the system-defined Standard Default Headset Template.
Note
The Standard Default Headset Configuration Template is a system-defined template. You can assign new
User Profiles to the Standard Default Headset Template but you can't edit the template. By default, all user
profiles are assigned to this template. To disassociate a user profile from this template, you must assign the
profile to a new template.
Procedure
Step 1
From Cisco Unified CM Administration, choose Device > Headset > Headset Template.
Step 2
Do either of the following:
• To edit an existing template, select the template.
• To create a new template, select any existing template and click Copy. The existing settings are applied
Step 3
Add a Name and Description for the template.
Step 4
Under Model and Firmware Settings, assign any customized headset settings that you want to apply to this
template. To add a new setting, click the Add button and configure the settings.
Step 5
Use the up and down arrows to move the User Profiles that you want to assign to this template to the Assigned
Uers Profiles list box. All users whom are assigned to those profiles will also be assigned to this headset
template.
Step 6
Click Save.
Step 7
Use the Set to Default button to return to the default template settings.
Step 8
Click Apply Config.
Cisco Headset 500 Series Administration Guide
20
Range
Autorange, Medium
Range, Short Range
to your new template.
Default
Notes
Medium
Controls the maximum distance between the
Range
Cisco Headset 560 Series and its base.
By default, the bases have a DECT range of
over 330 feet (100 meters) in ideal conditions.
If you configure the DECT radio range to
Medium Range or Short Range, the headset
base consumes less power but users can't move
as far from the base while on a call. Configure
DECT radio range to Short Range for high
density headset deployment.
For more detailed information on DECT
deployment, refer to the white paper on Cisco
Headset deployment,
Work for the Cisco Headset 560
Cisco Headset Administration
How to Deploy DECT at
Series.