Epson 6100i - PowerLite XGA LCD Projector Manual Fungsi - Halaman 2

Jelajahi secara online atau unduh pdf Manual Fungsi untuk Proyektor Epson 6100i - PowerLite XGA LCD Projector. Epson 6100i - PowerLite XGA LCD Projector 5 halaman. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Juga untuk Epson 6100i - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Spesifikasi (2 halaman), Panduan Pengoperasian (47 halaman), Pengaturan Cepat (2 halaman), Panduan Instalasi (19 halaman), Suplemen (1 halaman), Daftar Bagian (1 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman)

2. Select

Settings

3. Select

start automatically when your computer starts up.

4. Enter the IP address for the projector in the Projector IP Address field.

You cannot connect to the projector without entering a Projector IP

Address. See your projector's documentation for information on

obtaining your projector's IP address.

5. Enter the Web Control password or the password that was set using the

Epson EMP Monitor Utility in the Monitor Password field. If you

didn't set a password, don't enter anything.

6. Uncheck the boxes for the buttons that you do not want to display in

Advanced and Simple Mode.

7. Click

to save and close the settings window or

your changes and close the settings window.

from the Tool menu. You see a window like this:

if you want the Projector Control software to

to discard

Cancel

Connecting to the Projector