Cisco 6851 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 6851. Cisco 6851 40 halaman. Multiplatform phones
Juga untuk Cisco 6851: Panduan Instalasi (39 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna Cepat (2 halaman), Panduan Pengguna (8 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman)

Halaman Cetak
Cisco 6851 Panduan Pengguna

Vision-Impaired and Blind Accessibility Features

Your phone comes with standard accessibility features that require little or no setup.
Figure 5: Vision-Impaired and Blind Accessibility Features
1
High-contrast visual and audible alert of an incoming call
2
Line and feature buttons on the Cisco IP Phone
The line and feature buttons are on the left and right sides
of the screen.
3
Back-lit grayscale LCD screen with adjustable contrast on
the Cisco IP Phone
4
Softkeys
• These are large buttons just below the LCD.
5
Navigation Cluster (includes the Navigation ring and the
Select button)
• The Navigation cluster is located in the center
of the phone.
8 |
P a g e
Cisco IP Phone 6851 Series User Guide
Alerts you to an incoming call. The handset light strip
flashes during incoming calls and stays lit when a
voicemail message is received.
Use line buttons to start, answer, or switch to a call
on a particular line.
Features, such as speed dial, line status, privacy, do
not disturb (DND), and service URLs, can be
assigned to feature buttons.
Your administrator sets up programmable feature
buttons on your phone.
Colors indicate your phone's status:
- Green, steady: Line ready
- Amber, steady: Line not registered
- Amber, flashing: Line registering
- Red, steady: Line in use
- Red, flashing: Incoming call
- Red, Pulsing: Line on hold
Allows you to adjust your phone screen's contrast.
Provide access to special functions. The functions
are displayed on the LCD.
Use the Navigation ring to move up and down in the
phone LCD. The Select button is in the center of the
Navigation cluster.