Epson 745c - PowerLite XGA LCD Projector Panduan Pengoperasian - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Proyektor Epson 745c - PowerLite XGA LCD Projector. Epson 745c - PowerLite XGA LCD Projector 36 halaman. Release of check tool for network projectors v1.00 for windows
Juga untuk Epson 745c - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengaturan Cepat (2 halaman), Manual (24 halaman), Panduan Pengoperasian (47 halaman), Daftar Bagian (1 halaman), Buletin Dukungan Produk (30 halaman), Pengaturan Cepat (4 halaman), Panduan Instalasi (19 halaman), Panduan Pengguna (1 halaman), Ringkasan Teknis (7 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (42 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman), Pengaturan Cepat (2 halaman)

Halaman Cetak
Epson 745c - PowerLite XGA LCD Projector Panduan Pengoperasian
Using the control functions

Procedures for new timer settings

f
2
When you click "Add", the following window is
displayed and the new timer settings are applied.
At "Operation", you can carry out the operations of turning the
power on and off and switching the input sources, similarly for
the control buttons on the main window. If you set the input
source switching, the projector's power will turn on at the timer
start time even if it is not on at the time. Because of this, it is not
necessary to make two separate timer settings for turning the
power on and switching the input source.
3
After completing the timer settings, click [OK].
The timer settings that have been made will be registered and
they can be checked in the displayed timer list.
TIP
You can enable and disable all of the timer settings that have been
registered. Select "Timer" - "Enable" or "Disable" from the "Tool"
menu.
29