Epson 745c - PowerLite XGA LCD Projector Buletin Dukungan Produk - Halaman 30

Jelajahi secara online atau unduh pdf Buletin Dukungan Produk untuk Proyektor Epson 745c - PowerLite XGA LCD Projector. Epson 745c - PowerLite XGA LCD Projector 30 halaman. Release of check tool for network projectors v1.00 for windows
Juga untuk Epson 745c - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Panduan Pengaturan Cepat (2 halaman), Manual (24 halaman), Panduan Pengoperasian (47 halaman), Daftar Bagian (1 halaman), Pengaturan Cepat (4 halaman), Panduan Instalasi (19 halaman), Panduan Pengguna (1 halaman), Ringkasan Teknis (7 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (42 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman), Pengaturan Cepat (2 halaman)

EPSON

Date:

07/16/2003

PSB.2003.07.001

PSB #:

N/A

Reference:

Product(s):

PowerLite – 735c / 7850p / 8300i (with Easy-MP.Net option installed)

Epson Wireless Projectors and using dual mode 802.11b/g or 802.11b/a

Subject:

wireless PC Cards

This bulletin was created to inform you of issues that have been reported when accessing Epson

Wireless Projectors using dual mode 802.11b/g or 802.11b/a wireless PC Cards, either in ad-hoc

mode or through dual mode Access Points.

Reason:

The dual mode PC Cards and Access Points tend to have interference and compatibility

problems when operating in dual mode.

Solution:

For optimal performance results with Epson 802.11b wireless products, it is recommended that

single/native 802.11b mode be used.

If your dual mode wireless PC Card and/or Access Point can be configured to support the

802.11"b" mode only, set it to 802.11"b" only.

Note: In some cases it is not enough to disable dual mode and set the mode to 802.11"b" only;

on some dual mode PC cards (802.11b/g or 802.11b/a) the "A" and "G" modes cannot be turned

off.

RODUCT

UPPORT

ULLETIN

Page 1 of 1

Originator: TC

Authorization:

Total Pages: 1