Epson 745c - PowerLite XGA LCD Projector Pengaturan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Pengaturan Cepat untuk Proyektor Epson 745c - PowerLite XGA LCD Projector. Epson 745c - PowerLite XGA LCD Projector 4 halaman. Release of check tool for network projectors v1.00 for windows
Juga untuk Epson 745c - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Panduan Pengaturan Cepat (2 halaman), Manual (24 halaman), Panduan Pengoperasian (47 halaman), Daftar Bagian (1 halaman), Buletin Dukungan Produk (30 halaman), Panduan Instalasi (19 halaman), Panduan Pengguna (1 halaman), Ringkasan Teknis (7 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (42 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman), Pengaturan Cepat (2 halaman)

Turn the focus ring to sharpen the image.

Turn the zoom ring to reduce or enlarge the image.

Focus

If your image looks like

to one side of the screen at an angle. Place it directly in front of the

screen, facing the screen squarely.

If your image looks like

the projector to correct it.

Choose a

Presentation Method

How do you want to get images to the projector?

•

To connect to a notebook, see "If connecting

to a notebook" below.

•

To project over an 802.11g/b network, see

"If projecting wirelessly" on the back of this sheet.

You must have installed the projector's EasyMP

software and configured your projector and

computer before you can project wirelessly.

See your User's Guide for instructions.

•

To give a presentation stored on a memory card,

see Chapter 5 in your User's Guide.

If connecting to a notebook...

Make sure you've turned on the projector and adjusted the image

as described in sections 1 and 2.

Locate the computer cable that came with the projector. Connect

one end to the projector's blue Computer/Component Video port.

Connect the other end to your notebook's video-out port or

monitor port. If you can't connect the cable to your

PowerBook

, you may need to use an adapter. See your

PowerLite 745c User's Guide for instructions.

Press the Source Search button on the projector until your

computer image is displayed.

, you've placed the projector off

, press the

Zoom

buttons on

Computer cable

Wireless card

Turn over