Cisco 6945 Series Catatan Rilis - Halaman 11

Jelajahi secara online atau unduh pdf Catatan Rilis untuk Telepon IP Cisco 6945 Series. Cisco 6945 Series 18 halaman. 6900 series
Juga untuk Cisco 6945 Series: Lembar data (5 halaman), Referensi Cepat (2 halaman), Panduan Pengguna (10 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (8 halaman), Panduan Administrasi (14 halaman), Setup Manual (16 halaman), Fitur (29 halaman), Panduan Memulai Cepat (2 halaman), Instalasi Cepat & Panduan Pengguna (12 halaman), Panduan Pengguna Referensi Cepat (2 halaman), Manual (2 halaman), Petunjuk (3 halaman), Panduan Memulai Cepat (2 halaman), Panduan Fitur (4 halaman), Panduan Pengguna (34 halaman), Panduan Instalasi Cepat (12 halaman), Panduan Referensi Cepat (2 halaman)

Cisco Unified IP Phone 6900 Series Release Notes for Firmware Release 9.4(1)

Installation

Direct upgrades, using signed load files, are supported to Firmware Release 9.4(1) from 9.x. You can use the

following firmware release file for these direct upgrades.

Firmware Release 9.4(1) only applies to the Cisco Unified IP Phone 6921, 6941, 6945, and 6961 (SCCP

Note

and SIP).

• For Cisco Unified IP Phone 6921, 6941, and 6961:

• For Cisco Unified IP Phone 6945:

Before using the Cisco Unified IP Phone Firmware Release 9.4(1) with Cisco Unified Communications

Manager, you must install the latest firmware on all Cisco Unified Communications Manager servers in the

cluster.

Note

Firmware Release 9.4(1) only applies to the Cisco Unified IP Phone 6921, 6941, 6945, and 6961.

Procedure

Step 1

Go to the following URL:

http://www.cisco.com/cisco/software/navigator.html?mdfid=282677102&i=rm

Step 2

Choose your phone model.

Step 3

Choose one of the following firmware types:

• Skinny Client Control Protocol (SCCP) Software

• Session Initiation Protocol (SIP) Software

◦ cmterm-69xx-sccp.9-4-1-1.cop.sgn

◦ cmterm-69xx-sip.9-4-1-1.cop.sgn

◦ cmterm-6945-sccp.9-4-1-1.cop.sgn

◦ cmterm-6945-sip.9-4-1-1.cop.sgn

Cisco Unified IP Phone 6900 Series Release Notes for Firmware Release 9.4(1)

Installation