Cisco 6945 Series Panduan Administrasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Administrasi untuk Telepon IP Cisco 6945 Series. Cisco 6945 Series 14 halaman. 6900 series
Juga untuk Cisco 6945 Series: Lembar data (5 halaman), Referensi Cepat (2 halaman), Catatan Rilis (18 halaman), Panduan Pengguna (10 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (8 halaman), Setup Manual (16 halaman), Fitur (29 halaman), Panduan Memulai Cepat (2 halaman), Instalasi Cepat & Panduan Pengguna (12 halaman), Panduan Pengguna Referensi Cepat (2 halaman), Manual (2 halaman), Petunjuk (3 halaman), Panduan Memulai Cepat (2 halaman), Panduan Fitur (4 halaman), Panduan Pengguna (34 halaman), Panduan Instalasi Cepat (12 halaman), Panduan Referensi Cepat (2 halaman)

Halaman Cetak

1. Converting a New Phone from Sccp to Sip

Chapter

For information about determining a MAC address, see the

Unified IP Phone" section on page

After you have collected MAC addresses, in Cisco Unified CM Administration, choose Device > Phone

and click Add New to begin.

For complete instructions and conceptual information about Cisco Unified CM, go to the

Communications Manager

Guide.

Adding Phones with BAT

Cisco Unified Communications Manager Bulk Administration Tool (BAT) enables you to perform batch

operations, including registration, on multiple phones. To access BAT, choose Bulk Administration

drop-down menu in Cisco Unified Communications Manager Administration,

To add phones by using BAT only (not in conjunction with TAPS), you can use the MAC address for

each phone or dummy MAC addresses if you have a large number of new phones.

For information about determining a MAC address, see the

Unified IP Phone" section on page

For detailed instructions about using BAT, go to the

Communications Manager Administration Guide.

Using Cisco Unified IP Phones with Different Protocols

The Cisco Unified IP Phone can operate with SCCP (Skinny Client Control Protocol) or SIP (Session

Initiation Protocol). You can convert a phone that is using one protocol for use with the other protocol.

This section includes these topics:

•

Converting a New Phone from SCCP to SIP

A new, unused phone is set for SCCP by default. To convert this phone to SIP, perform these steps:

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

OL-24567-01

Overview" chapter in the Cisco Unified Communications Manager System

Adding Phones with Auto-Registration, page 2-9

Adding Phones with Auto-Registration and TAPS, page 2-10

Adding Phones with BAT, page 2-11

Adding Phones with Auto-Registration, page 2-9

Adding Phones with Auto-Registration and TAPS, page 2-10

Adding Phones with Cisco Unified CM Administration, page 2-10

Converting a New Phone from SCCP to SIP, page 2-11

Converting an In-Use Phone from One Protocol to the Other Protocol, page 2-12

Deploying a Phone in an SCCP and SIP Environment, page 2-12

Using Cisco Unified IP Phones with Different Protocols

"Determining the MAC Address for a Cisco

2-13.

"Determining the MAC Address for a Cisco

2-13.

"Bulk Administration"

"Cisco Unified

chapter in the Cisco Unified

2-11