Cisco 6945 Series Setup Manual - Halaman 16

Jelajahi secara online atau unduh pdf Setup Manual untuk Telepon IP Cisco 6945 Series. Cisco 6945 Series 16 halaman. 6900 series
Juga untuk Cisco 6945 Series: Lembar data (5 halaman), Referensi Cepat (2 halaman), Catatan Rilis (18 halaman), Panduan Pengguna (10 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (8 halaman), Panduan Administrasi (14 halaman), Fitur (29 halaman), Panduan Memulai Cepat (2 halaman), Instalasi Cepat & Panduan Pengguna (12 halaman), Panduan Pengguna Referensi Cepat (2 halaman), Manual (2 halaman), Petunjuk (3 halaman), Panduan Memulai Cepat (2 halaman), Panduan Fitur (4 halaman), Panduan Pengguna (34 halaman), Panduan Instalasi Cepat (12 halaman), Panduan Referensi Cepat (2 halaman)

Halaman Cetak
Cisco 6945 Series Setup Manual
Configuring Security on the Cisco Unified IP Phone
You can initiate the installation of an LSC from the Security Configuration menu on the phone. This
menu also lets you update or remove an LSC.
Before You Begin
Make sure that the appropriate Cisco Unified CM and the Certificate Authority Proxy Function (CAPF)
security configurations are complete:
The CTL file should have a CAPF certificate.
•
On Cisco Unified Communications Operating System Administration, verify that the CAPF
•
certificate has been installed.
The CAPF is running and configured.
•
Refer to Cisco Unified Communications Manager Security Guide for more information.
To manually configure an LSC on the phone, perform these steps:
Procedure
Obtain the CAPF authentication code that was set when the CAPF was configured.
Step 1
From the phone, choose Applications > Admin Settings > Security Configuration.
Step 2
Note
To unlock settings, see the
Step 3
Scroll to LSC and press the Update softkey.
Step 4
The phone prompts for an authentication string.
Enter the authentication code and press the Submit softkey.
Step 5
The phone begins to install, update, or remove the LSC, depending on how the CAPF was configured.
During the procedure, a series of messages appears in the LSC option field in the Security Configuration
menu, so you can monitor progress.
The LSC install, update, or removal process can take a long time to complete. You can stop the process
at any time by pressing the Stop softkey from the Security Configuration menu. (Settings must be
unlocked before you can press this softkey.)
You can verify that an LSC is installed on the phone by choosing Administrator Settings > Phone
Information and ensuring that the LSC setting shows Installed.
Related Topic
Understanding Security Features for Cisco Unified IP Phones, page 1-14
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
3-16
You can control access to the Administrator Settings Menu by using the Settings Access field in
the Cisco Unified Communications Manager Administration Phone Configuration window. For
more information, see the Cisco Unified Communications Manager Administration Guide.
"Unlocking and Locking Options" section on page
Chapter
4-3.
OL-24567-01