Epson 7600 - EMP XGA LCD Projector Panduan Komunikasi - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Komunikasi untuk Proyektor Epson 7600 - EMP XGA LCD Projector. Epson 7600 - EMP XGA LCD Projector 20 halaman. Product support bulletin(s)
Juga untuk Epson 7600 - EMP XGA LCD Projector: Spesifikasi (2 halaman), Panduan Pengguna (10 halaman), Buletin Dukungan Produk (2 halaman)
Halaman Cetak
(4) FromTo
: Specifies the sending and receiving ends of the FromTo command. (1 byte)
Indicates sending end between 7th and 4th bit and receiving end between 3rd to 0th bit.
The basic FromTo combination is shown below.
Table 5-3. List of FromTo codes (bit)
PC (RS-232C communication)
Master projector or stand-alone projector
The apply/reply codes using FromTo combinations are shown below.
Table 5-4. List of FromTo codes for apply commands
From
PC (Serial)
Projector (Master)
Table 5-5. List of FromTo codes for reply commands
From
PC (Serial)
Projector (Master)
(5) Functional Classification (Group)
: Represents the functional classification as classification codes. (1 byte)
Table 5-6. List of Functional Classification
Functional classification
Special control (Special)
Screen control (Screen)
Audio control (Audio)
PC control (PC)
VIDEO control (Video)
Display control (Display)
Option (Option)
Custom (Custom)
Reserved
Reserved
Reserved
Reserved
Stack control (Stack)
Reserved
* Refer to the full manual if using stack control.
ESC/VP Level 6 Serial Communication Manual (Abridged Edition)
Machines
To
To
Group Code
0x00
Performs switching and resetting the operating mode.
0x01
Controls the display screen.
0x02
Controls the audio.
0x03
Controls PC's image quality.
0x04
Controls Video's image quality.
0x05
Controls the display.
0x06
Sets the additional functions for the whole projector.
0x07
Sets the additional functions that user can program.
0x08
0x09
0x0E
0x0F
0x10
Performs various kinds of controls of Stack.
0x20
Code (bit)
0x00
0x01
Apply
0x01
Reply
0x10
6 of 20
Caption