Epson 7850p - PowerLite XGA LCD Projector Panduan Informasi Produk - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Informasi Produk untuk Proyektor Epson 7850p - PowerLite XGA LCD Projector. Epson 7850p - PowerLite XGA LCD Projector 25 halaman. Release of check tool for network projectors v1.00 for windows
Juga untuk Epson 7850p - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Panduan Pengguna (12 halaman), Suku Cadang Pengganti (1 halaman), Panduan Pengoperasian (47 halaman), Buletin Dukungan Produk (30 halaman), Panduan Instalasi (5 halaman), Pengaturan Cepat (2 halaman), Brosur & Spesifikasi (2 halaman), Ringkasan Teknis (7 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (42 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman)

Halaman Cetak

Epson 7850p - PowerLite XGA LCD Projector Panduan Informasi Produk

EPSON PowerLite 7850p Projector

2. If you don't see your projector, check the following:

❏ Make sure your wireless signal is strong enough to

establish a connection (see your computer

documentation for details).

❏ Make sure your computer's SSID matches the ESSID

you assigned to the projector (for example,

). Remember that both the SSID and ESSID are

ROOM

case-sensitive. If you're using channel mode (Ad Hoc

mode only), make sure the channel set for the

computer matches that of the projector.

❏ If you're using Access Point mode, make sure the

projector and your computer are on the same subnet.

❏ Restart your computer and start NS Connection again.

❏ If you still don't see your projector and you are using

Access Point mode, follow the instructions in

"Connecting in IP Connect Mode" on page 16 to

connect to the projector manually.

3. Once the name of your projector appears, select it and click

. If more than one projector is listed, you can

Connect

select additional ones and connect to them at the same

time. If the selected projector is being used by another

person, you can still connect to it; doing so automatically

disconnects the other user.

4. If you are prompted for a keyword, enter the four-digit

number displayed on the EasyMP Network screen and click

5. Once the connection is established, you see your

computer's image transmitted to the projection screen, and

a floating control bar:

EPSON PowerLite 7850p Projector

CONF

Click here to minimize

6/03

6. From the control bar, you can access these NS Connection

features:

Provides help using NS Connection.

Lists which projectors are available or in use.

Lets you access the projector's menu system

and the EasyMP menus from an HTML

browser window.

Lets you keep the projected image on the

screen, even if the image on your computer

or laptop changes.

Turns off the image and sound.

Lets you zoom in on a part of the image.

Lets you change the brightness, keystone

angle, contrast, color mode, and other basic

settings.

Lets you switch between the

S-Video

Lets you switch between the

DVI

ports.

Flashes three lights in sequence when the

computer and projector connection is active.

7. When done with your presentation, click

the control bar.

Connecting in IP Connect Mode

Even if your projector and computer are on a different subnet

(Access Point mode only) or connecting over different routers,

you can establish a connection manually using IP Connect

Mode.

1. Start NS Connection on the computer to which you want

to connect. You see this screen:

Video

BNC

, and

ports.

Computer

Disconnect

and