Siemens VN2001-A1 Panduan Petunjuk Instalasi
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Unit Kontrol Siemens VN2001-A1. Siemens VN2001-A1 8 halaman. Ethernet module 10/100 basetx
Halaman Cetak
INSTALLATION INSTRUCTIONS
Model VN2001-A1
The optional Model VN2001-A1 Ethernet Module (10/100 BaseTx) is an interface card which provides dual
interconnecting copper wire links for networked systems.
FEATURES
The principal features of the VN2001-A1 (10/100 BaseTx) include:
Is easily plugged into the host card or assembly
Is automatically identified by the system at power up
Protects the Ethernet signal path from overvoltage caused by electrostatic
discharge (ESD) or electrical fast transients (EFT)
Provides optimal ground fault detection (user selectable)
Provides Power-over-Ethernet (PoE), 24V, 500mA (user
selectable)
Can be used in the UL and ULC markets
PRE-INSTALLATION
1. Determine from the site-specific shop drawings whether the VN2001-A1 should be set for ground fault
supervision alone, Power-over-Ethernet (PoE) plus ground fault supervision, or neither function.
2. For ground fault supervision alone, set the jumpers as illustrated in Figure 2a. For Power-over
Ethernet plus ground fault supervision, set the jumpers as illustrated in Figure 2b. If neither ground
fault supervision nor PoE is required, set the jumpers to the default setting as illustrated in Figure 2c
GND
TX
18V-30V
RX
GND
a. Ground Fault Only
Figure 2
Jumper Settings
A6V10370415_en--_a
Ethernet Module (10/100 BaseTx)
TX
RX
b. Power-over-Ethernet and
Ground Fault
1
GND
18V-30V
GND
Figure 1
VN2001-A1 Ethernet Module
(10/100 BaseTx
GND
TX
18V-30V
RX
GND
c. Open (default setting)