Siemens XC10 Series Operasi - Halaman 8

Jelajahi secara online atau unduh pdf Operasi untuk Unit Kontrol Siemens XC10 Series. Siemens XC10 Series 32 halaman. Extinguishing control unit

Safety

2.2

Safety regulations for the method of operation

Building Technologies

Fire Safety

Information about the risk of injury is shown as follows:

WARNING

Nature and origin of the danger

Consequences if the danger occurs

Measures / prohibitions for danger avoidance

Design for possible damage to property

Information about possible damage to property is shown as follows:

NOTICE

Nature and origin of the danger

Consequences if the danger occurs

Measures / prohibitions for danger avoidance

National standards, regulations and legislation

Siemens products are developed and produced in compliance with the relevant

European and international safety standards. Should additional national or local

safety standards or legislation concerning the planning, assembly, installation,

operation or disposal of the product apply at the place of operation, then these

must also be taken into account together with the safety regulations in the product

documentation.

Electrical installations

WARNING

Electrical voltage

Electric shock

Work on electrical installations may only be carried out by qualified

electricians or by instructed persons working under the guidance and

supervision of a qualified electrician, in accordance with the electro technical

regulations

Wherever possible disconnect products from the power supply when carrying

out commissioning, maintenance or repair work on them.

Lock volt-free areas to prevent them being switched back on again by mistake.

Label the connection terminals with external voltage using a 'DANGER External

voltage' sign.

Route mains connections to products separately and fuse them with their own,

clearly marked fuse.

Fit an easily accessible disconnecting device in accordance with IEC 60950-1

outside of installation.

Produce earthing as stated in local safety regulations.

A6V10257477_c_en_--

2012-06