Epson 8300NL - PowerLite XGA LCD Projector Panduan Pengoperasian - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Proyektor Epson 8300NL - PowerLite XGA LCD Projector. Epson 8300NL - PowerLite XGA LCD Projector 36 halaman. With easymp.net option
Juga untuk Epson 8300NL - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Pengaturan Cepat (2 halaman), Buletin Dukungan Produk (27 halaman), Panduan Cepat (20 halaman), Daftar Bagian (1 halaman), Brosur & Spesifikasi (2 halaman), Ringkasan Teknis (7 halaman), Buletin Dukungan Produk (42 halaman)

Halaman Cetak

Epson 8300NL - PowerLite XGA LCD Projector Panduan Pengoperasian

Monitoring window layout

Error information: Shows a notification or warning/problem status

using the following icons.

Clean Air Filter

Notice

Replace Lamp

High-temperature

warning

Replace Air Filter

No Air Filter

Low Air Flow

Air Flow Sensor Err.

Low air flow error

Air filter air flow

sensor error

Lamp Cover Open

*1 When "Temperature level display group view" is set to "On" at

"Environment setup" in the "Tool" menu, an icon indicating the internal

temperature of the projector will be displayed on top of the projector

icon. The default setting is "Off".

*2 Check the following items.

• Check that the projector's power is turned on.

• Check that the LAN cable is connected.

• Check that "Network Monitoring" is set to "ON" or "Standby Mode"

is set to "Network ON" in the projector's configuration menu.

*3 Check that the projector has been correctly connected to the network.

*4 You can display the "Replace Lamp" warning at any time preset in

"Environment setup" in the "Tool" menu.

Lamp Error

Lamp failure at

power on

High internal

temperature error

Internal Error

Fan error

Sensor error

Supply System Error

(Ballast)

Auto Iris Error

Other error

TIP

• The projector information that is generated when a problem is

detected is stored until EMP Monitor is closed. The EMP Monitor

displays will not be updated automatically even if the projector status

returns to normal. Click [Refresh] in the main window to update the

status.

• Detectable error information differs with the projector you are using.

Selecting display items

You can select only the required items to be displayed in "Detail list view".

PROCEDURE

Select "Option" from the "View" menu.

The "Option" window will be displayed.