Cisco 7900 Series Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 7900 Series. Cisco 7900 Series 20 halaman. M5 phone system

Holding and Resuming Calls

During a conversation, press Hold.

To resume the conversation:

Press the call's line button ; or

press the Resume softkey.

When a call has been placed on hold, your phone will chirp periodically (usually

set at 60 seconds) to remind you that the call is still on hold.

Allows you to place a call on a park line, which is similar to placing it on

hold, except your line is freed and the call can be retrieved from other

phones in your organization.

Parking a Call

During a call, press more.

Press Park.

Choose the "Park current call" menu option by using the scroll button

and Select, or the keypad. The call is parked and your line is freed.

When a call has been parked, your phone will chirp periodically (usually set at 60

seconds) to remind you that the call is still parked .

Retrieving a Parked Call

Press more and then Park.

A list of parked calls and the extensions that parked them is shown.

Use the PageDn and PageUp softkeys to view additional parked calls.

Select. Call details for the parked call are displayed.

Press PickUp.

While on a call, press Transfer. The call is placed on hold, and you

hear a dial tone.

Enter the extension, or 9 and the area code and phone number.

A call is placed to the transfer destination number so that you may

inform the party of the transfer. Then:

If the called party wishes to accept the transfer, press Connect;

the call is connected.

If the called party does not accept, or you reach voicemail, press

Cancel to return to the initial call.

You can transfer without announcing the transfer by pressing

the called party picks up. If the party does not pick up, the call will be routed to

the called party's no answer destination, usually voicemail.

Connect

before