Siemens MB578G5 6B Series Panduan Pengguna dan Petunjuk Instalasi - Halaman 20
Jelajahi secara online atau unduh pdf Panduan Pengguna dan Petunjuk Instalasi untuk Oven Siemens MB578G5 6B Series. Siemens MB578G5 6B Series 48 halaman.
Juga untuk Siemens MB578G5 6B Series: Panduan Pengguna dan Petunjuk Instalasi (48 halaman)
Halaman Cetaken Basic settings
14 Basic settings
You can configure the basic settings for your appliance to meet your needs.
14.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Basic setting
Signal duration upon completion of a time or
timer period
Waiting time until a setting is applied
Button tone when pressing a button
Brightness of the display illumination
Time display
Childproof lock can be adjusted
→ "Childproof lock", Page 19
Interior lighting during operation
Cooling fan run-on time
Telescopic shelves retrofitted
Sabbath mode available
→ "Sabbath mode", Page 19
Automatic rapid heating from 200 °C
Reset all values to factory settings
. .
Home Connect Settings
1
Factory setting (may vary according to model)
2
Depending on the appliance specifications
3
Bottom oven
14.2 Changing basic settings
Requirement: The appliance is switched off.
1.
Press and hold the
four seconds.
a The first basic setting appears in the display,
e.g. .
2.
Use the temperature selector to change the setting.
3.
Use the
or
button to switch to the next basic
setting.
20
2, 3
3
button for approximately
Selection
= 10 seconds
= 30 seconds
= 2 minutes
= 3 seconds
= 6 seconds
= 10 seconds
= off
1
= on
= dark
1
= medium
= bright
= hide the time
= display the time
= no
1
= yes
= yes, with locked door
= no
1
= yes
= short
1
= medium
= long
= extra-long
1
= no
(for rails and 1-level pull-out)
= yes (for 2- and 3-level pull-out)
1
= no
= yes
2
= no
1
= yes
1
= no
= yes
→ "Home Connect ", Page 21
4.
To save the changes, press and hold the
for approx. four seconds.
Note: Your changes to the basic settings will be re-
tained even after a power failure.
14.3 Discarding changes to the basic
settings
▶
Turn the function selector.
a All changes are discarded and not saved.
1
1
1
button