Epson 835p - PowerLite XGA LCD Projector Manual Fungsi

Jelajahi secara online atau unduh pdf Manual Fungsi untuk Proyektor Epson 835p - PowerLite XGA LCD Projector. Epson 835p - PowerLite XGA LCD Projector 5 halaman. Release of check tool for network projectors v1.00 for windows
Juga untuk Epson 835p - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Pengaturan Cepat (4 halaman), Panduan Pengoperasian (47 halaman), Buletin Dukungan Produk (30 halaman), Panduan Tambahan (1 halaman), Brosur & Spesifikasi (4 halaman), Informasi Produk (21 halaman), Panduan Instalasi (19 halaman), Panduan Pengguna (1 halaman), Ringkasan Teknis (7 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (42 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman), Lembar Spesifikasi (4 halaman)

Epson 835p - PowerLite XGA LCD Projector Manual Fungsi
Epson Projector Control
®
The Epson
Projector Control software lets you control the projector over a
wired or wireless network from a computer running Windows
XP SP2 32-bit, or Windows Vista
operations, such as turning the projector on/off and switching sources,
from your computer without using the projector's remote control.
Note: Macintosh
To install the Projector Control software, double-click the installer icon and
follow the on-screen instructions.
Make sure the following requirements are met before starting the Projector
Control software:
The Projector Control software is installed on your computer
Your computer and the projector are connected to the same network
and you can access the projector
The
Network

Connecting to the Projector

1. In Windows, click
Projector Control
User's Guide
®
systems are not supported.
setting in the projector's menu is set to
>
Start
. You see a window like this:
32-bit. It enables you to perform
>
Programs
EPSON Projector
®
2000 SP4,
On
>