Siemens Family 1085 Petunjuk Pengoperasian dan Pemasangan - Halaman 42

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Mesin cuci Siemens Family 1085. Siemens Family 1085 44 halaman. Computer controlled slimline frontloader

Halaman Cetak

Electrical

connection

When heating, the maximum current of the

washing machine is 10A,so please make sure

that the power supply system(voltage; current

and the cable) is applicable to the load of the

applied appliance.

The machine must only be connect to an alter-

nating current supply via a correctly installed

earthed socket.

The voltage indicated on the rating plate at the

back of the machine must match the mains vo-

ltage at the installation location.

Connected load and required fuse or line

protecting cut-out are indicated on the rating

plate.

It must be ensured that the plug and socket

match, that the conductor cross-section is

sufficient and that the earthing system has

been installed in compliance with regulations.

Multiple plug connectors and extension cables

must not be used.

Do not connect the machine to electrical outlets

while your hands are wet or damp.

To remove the plug from the socket, grasp the

plug firmly and pull it out. Do not pull at the cable.

If the supply cord is damaged, it will be replaced

by a special cord or a assembly available from

the manufacturer or its service agent.

In the event that an earth-leakage circuit breaker

is to be used, only use types marked with the

following symbol:

guarantee compliance with all current regulations.

. Only this symbol can