Siemens WG44A1XVZA Panduan Pengguna dan Petunjuk Instalasi - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna dan Petunjuk Instalasi untuk Mesin cuci Siemens WG44A1XVZA. Siemens WG44A1XVZA 48 halaman.

Installation loca-

tion

Wooden joist

floor

Kitchen unit

Against a wall

4.4 Removing the transit

bolts

The appliance is secured for trans-

portation using transit bolts on the

rear of the appliance.

Note: Keep the transit bolt screws

and the sleeves in a safe place for fu-

ture transport → Page 45.

Requirements

Place the appli-

ance on a water-

resistant wooden

board (minimum

thickness of

30 mm) which is

screwed tightly to

the floor.

Only install the

appliance under-

neath a continu-

ous worktop that

is securely con-

nected to adja-

cent cabinets.

Required niche

width: 60 cm.

Do not trap the

hoses between

the wall and the

appliance.

Installation and connection en

Pull the hoses out of the holders.

Unscrew

and remove

screws for the 4 transit bolts with a

WAF 13 wrench.

Remove the power cable from the

holder.

all