Siemens WI 14S440EU Buku Petunjuk - Halaman 2
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mesin cuci Siemens WI 14S440EU. Siemens WI 14S440EU 8 halaman.
Halaman Cetak
Risk of electric shock!
Care
Maintenance
Pull out the mains plug!
Risk of explosion! No solvents!
Machine housing, control panel
- Wipe with a soft, damp cloth.
- Do not use abrasive detergents.
1.
- Immediately remove washing and cleaning agent residue.
- Do not clean the appliance with a water jet.
Clean the detergent drawer ...
... if it contains detergent or fabric softener residue.
2.
1.
Pull out, depress insert, completely remove.
Remove insert: Press insert upwards with finger.
3.
2.
Clean detergent dispenser and insert with water and a brush and dry.
3.
Attach insert and engage (connect cylinder to guide pin).
4.
4.
Insert detergent drawer.
Leave detergent drawer open so that residual water can evaporate.
Drum
Leave washing machine door open so that the drum can dry out.
Rust stains use chlorine free cleaning agent, not steel wool.
Descaling
No washing in the machine!
1.
Not necessary if detergent dispensed correctly. However, follow the instructions of the descaler
2.
manufacturer.
3.
Insert for liquid detergent
depending on model
4.
Position insert for dispensing liquid detergent:
- Completely remove the detergent drawer > Page 8.
1.
- Push insert forwards.
Do not use insert (push up):
- for gelatinous detergents and washing powders;
- for programmes with Prewash and W (Finish in) option.
Information on the display panel
depending on model
F: 16
Close the washing machine door properly; washing may be caught.
F: 17, 29
Turn the tap on fully, supply hose kinked/jammed;
2.
Clean filter > Page 9; water pressure too low.
F: 18
Clean detergent solution pump -> Page 9; outlet pipe/drainage hose blocked.
F: 23
Water in the base pan, appliance leaking. Call customer service!
F: 42, 43, 44
Motor fault. Call customer service!
Other displays
Switch off the appliance, wait for 5 seconds and switch it back on.
If the display appears again, call customer services ->
Installation instructions, Page 7.
7
8
Risk of scalding!
What to do if ...
Allow deterhgent solution to cool down!
Turn off the tap!
F
Water is running out.
Detergent solution pump
F
Water not flowing in.
Set programme selector to = Off, pull out the mains plug.
Detergent not washed
Take the drainage hose out of the retainer.
in.
Remove the sealing cap, allow the detergent solution to
flow out.
F
Washing machine door
Push the sealing cap back on.
cannot be opened.
Carefully unscrew the pump cover (residual water).
F
Programme does not
start.
Clean the interior, pump cover thread and pump housing (the impeller in the
F
Detergent solution is not
detergent solution pump must rotate).
drained.
F
Water not visible in the
Reinsert the pump cover and screw on tightly. The handle should be upright.
drum.
Place the drainage hose back in the retainer.
F
Spin result not
satisfactory.
To prevent unused detergent from flowing into the outlet during the next wash:
F
Spin cycle actuated
Pour 1 litre of water into dispenser II and start the b Empty programme.
several times.
F
Dispenser
2
not
Filter in the water inlet hose
completely rinsed out.
Risk of electric shock!
Do not immerse Aqua Stop safety device in water
F
Odour formation in the
(contains electric valve).
washing machine.
Release water pressure in the supply hose:
F
Foam is coming out of
Turn off the tap!
the detergent drawer.
Select any programme (except Spin B/b Empty).
Select M (Start/Pause). Leave programme for approx. 40 seconds.
Set programme selector to = Off. Pull out the mains plug.
F
Intense noise formation,
vibrations and
Clean filter:
"wandering" during spin
Depending on model:
cycle.
Remove hose from tap.
Clean filter with small brush.
F
Display panel/indicator
lights do not function
while the appliance is
or
running.
F
Programme progress
Remove hose from the rear.
Remove filter with pliers and clean.
longer than usual.
F
Detergent residue on the
Connect the hose and check for leaks.
washing.
F
In the pause state
M (Start/Pause) flashes
very quickly and a signal
sounds.
F
If a fault cannot be rectified or a repair is required:
- Set programme selector to = Off and pull out the mains plug.
- Turn off tap and call customer service > Installation instructions, Page 7.
9
Safety instructions
- Correctly attach/replace drainage hose.
- Tighten screw fitting on the supply hose.
- Read and follow the operating and installation instructions and all other information enclosed
- M (Start/Pause) not selected?
with the washing machine.
- Tap not open?
- Retain documents for subsequent use.
- Filter blocked? Clean filter -> Page 9.
Risk of electric shock
- Never pull out the mains plug by tugging the power cord!
- Supply hose kinked or jammed?
- Never insert/pull out the mains plug with damp hands.
- Safety function active. Programme stopped? -> Page 4.
Danger to life
Redundant appliances:
- D (Rinse stop = without final spin) selected? -> Page 4.
- Pull out the mains plug.
- Can be opened via emergency release only -> Page 6.
- Sever the power cord and discard together with the plug.
- M (Start/Pause) or W (Finish in) selected?
- Destroy the lock on the washing machine door.
- Washing machine door closed?
This will prevent children from locking themselves in and
suffocating.
- Clean detergent solution pump -> Page 9.
Risk of suffocation
- Keep packaging, plastic film and packaging parts out of the reach
- Clean outlet pipe and/or drainage hose.
of children.
Risk of poisioning
- Keep detergents and care products out of the reach of children.
- Not a fault - water below the visible area.
Risk of explosion
- Caused by detergents containing solvents, e.g. stain
remover/items of washing pretreated with solvent naphtha may
- Wash small and large items of washing together.
result in an explosion after being loaded into the washing machine.
-
(Less Ironing) selected? -> Page 5.
Before hand thoroughly rinse items of washing by hand.
- Too low speed selected? -> Page 3.
Risk of injury
- Washing machine door may become very hot.
- Not a fault - unbalanced load detection system adjusts
- Caution when draining hot detergent solution.
imbalance.
- Do not climb on the washing machine.
- Remove the insert. Clean detergent drawer and insert > Page 8.
- Do not lean on the open washing machine door.
- Do not touch the drum in case it is still spinning.
- Run Cottons
90 ºC programme without washing.
Use standard detergent.
Consumption values
- Too much detergent used?
Mix 1 tablespoon of fabric conditioner with ½ litre of water and
Programme
Additonal
pour into dispenser II in the detergent drawer.
function
- Reduce detergent dosage for the next wash cycle.
30 °C*
v (Intensive Wash)
Cottons
- Appliance feet fixed?
40 °C*
Cottons
v (Intensive Wash)
Secure appliance feet > Installation instructions, Page 5.
- Transportation safety devices removed?
60 °C
Cottons
v (Intensive Wash)
Remove transportation protection devices >
Cottons Eco j 60 °C*
-
Installation instructions, Page 4.
90 °C
Cottons
-
- Power failure?
Easy Care A 40 °C*
v (Intensive Wash)
- Fuse tripped? Switch on/replace fuse.
Easy Care A 40 °C
- If the fault occurs repeatedly, call customer service.
(also suitable as Short
-
programme)
- Not a fault - unbalanced load detection system adjusts imbalance
Delicate/Silk q Å (cold)
-
by repeatedly distributing the washing.
Delicate/Silk q 30 °C
-
- Not a fault foam detection system active, a rinse cycle is started.
u
Wool U Å (cold)
-
- Occasionally phosphate free detergents contain water insoluble
residue.
Wool U 30 °C
u
-
- Select Rinse K or brush the laundry after washing.
* Programme setting with maximum spin speed for conducting test according to currently valid
- Water level too high. Top up washing is not possible.
If required, close door immediately.
European Standard 60456.
- Select "Start/Pause" to continue the programme.
** The values deviate from the indicated values depending on water pressure, water hardness, water
inlet temperature, room temperature, type and amount of washing and degree of soiling, utilised
detergent, fluctuations in the mains voltage and selected additional functions.
10
Operating instructions
Load
Current**
Water**
Programme
duration**
7.0 kg
0.55 kWh
75 l
2:12 h
7.0 kg
0.85 kWh
75 l
2:12 h
7.0 kg
1.50 kWh
75 l
2:12 h
7.0 kg
1.19 kWh
49 l
2:25 h
7.0 kg
2.20 kWh
87 l
2:00 h
3.5 kg
0.55 kWh
55 l
1:12 h
Washing
3.5 kg
0.54 kWh
55 l
0:45 h
machine
2.0 kg
0.03 kWh
39 l
0:40 h
2.0 kg
0.20 kWh
39 l
0:40 h
2.0 kg
0.08 kWh
47 l
0:36 h
2.0 kg
0.20 kWh
47 l
0:36 h
Read these instructions before switching on the washing machine!Also
follow the separate Installation instructions.
Follow the safety instructions on page 11!
11
en