Siemens WM SERIES Buku Petunjuk dan Petunjuk Instalasi - Halaman 16
Jelajahi secara online atau unduh pdf Buku Petunjuk dan Petunjuk Instalasi untuk Mesin cuci Siemens WM SERIES. Siemens WM SERIES 32 halaman.
Juga untuk Siemens WM SERIES: Buku Petunjuk dan Petunjuk Instalasi (36 halaman)
Halaman Cetak
Operating the appliance
en
Changing the programme
Press the Start button to pause the
1.
programme.
Select a different programme.
2.
Press the Start button again. The
3.
new programme starts from the
beginning.
Cancel the programme
Press the Start button to cancel the
1.
programme.
To cool the laundry: Set the
2.
programme to Rinse.
Press the Start button again. The
3.
rinse programme starts.
After the programme has ended, you
can remove the laundry.
Programme end
‹ appears in the display panel and the
start button indicator lamp is off.
If the 9 symbol also appears in the
display panel, the washing machine has
detected too much foam during the
wash programme and automatically
switched on a rinse cycle to remove the
foam.
Add less detergent for the next
Note:
washing cycle with the same load.
16
Removing laundry/switching
off the appliance
Open the washing machine door
1.
and remove the laundry.
Notes
– If you cannot open the washing
machine door, the appliance is
still locked. Wait until the
programme ends.
– If the display panel does not light
up, energy-saving mode is active.
To activate, select any button.
Set the programme selector to the
2.
Off position. The appliance is
switched off.
Turn off the tap.
3.
Not required for Aqua-Stop
Note:
models.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Leave the washing machine door
■
and detergent drawer open so that
any residual water can dry away.