Siemens WM**U series Panduan Pemasangan & Pengoperasian - Halaman 24
Jelajahi secara online atau unduh pdf Panduan Pemasangan & Pengoperasian untuk Mesin cuci Siemens WM**U series. Siemens WM**U series 40 halaman.
Halaman Cetak
Sensors
en
Possible setting values:
0
off
1
quiet
2
medium
3
loud
4
very loud
Button signal
You can touch position 2 and use the +
button to adjust the volume of the
button signal, e.g. › - „.
Possible setting values:
0
off
1
quiet
2
medium
3
loud
4
very loud
Brightness
Possible setting values: 1 - 4
You can touch position 3 and use the +
button to adjust the brightness of the
Touch-Display, e.g. ' - „.
Possible setting values:
1
not very bright
2
normal level of brightness
3
bright
4
very bright
24
Switching the drum-care information
signal on/off
You can touch position 4 and use the +
button to switch the ä Drum Clean
information signal on or off, e.g. š - ‚.
Possible setting values:
0
off
1
on
H
Sensors
U nbalanced load detection
S e n s o r s
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Place large and small items of
Note:
laundry evenly in the drum.
Aqua-Sensors
During the rinse cycle the Aqua sensor
checks the degree of turbidity (turbidity
is caused by dirt and detergent residue)
of the rinsing water. The duration and
the number of rinse cycles depend on
the turbidity of the water.