ActronAir WRE-072CS Panduan Instalasi dan Pengaturan - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengaturan untuk Pendingin Udara ActronAir WRE-072CS. ActronAir WRE-072CS 16 halaman. Wall hung systems
Juga untuk ActronAir WRE-072CS: Panduan Pemilik (16 halaman)
Halaman Cetak
Installation Guide
02. Installation
BEFORE STARTING:
Isolate the power to the indoor unit and ensure power is not being
supplied to the system to prevent electric shock. Ensure correct lockout/
tag out procedures are adhered to.
Remove the Easyconnect USB kit from the box and take off the protective cap.
1. Open the front panel of the indoor unit and insert the Easyconnect USB
kit into the USB port on the display receiver PCB. If the port is not present,
install the supplied USB port cable plug into the vacant CN3 plug which is
provided in the WUK-WH1 bag.
NOTE
USB ports are factory standard for all units manufactured after February,
2018. Check the serial number to identify the correct manufacturing date.
2. Please place the QR code sticker on the side of the indoor unit near the
manufacturing label, providing sufficient access to the side of the unit.
Serene
Open the receiver board
by unscrewing the screw.
Open the receiver board
by unscrewing the screw.
Installation Guide - Easyconnect App
Document: 9590-4008 Ver. 3 201106
Easyconnect App
Serene 2
5