Siemens WM12W460IL Buku Petunjuk dan Petunjuk Instalasi - Halaman 23

Jelajahi secara online atau unduh pdf Buku Petunjuk dan Petunjuk Instalasi untuk Mesin cuci Siemens WM12W460IL. Siemens WM12W460IL 44 halaman.

If the following appears in the display
panel:
Both the - P - and Ï symbols light
up, it is possible to add laundry.
- P - lights up, it is not possible to
add laundry.
To continue the programme, press the
Ü button. The programme continues
automatically.
Notes
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
The load display is not active during
reloading.

Changing the programme

If you have started the wrong
programme by mistake, you can
change the programme as follows:
Press the Ü button.
1.
Select another programme.
2.
Press the Ü button. The new
3.
programme starts from the
beginning.

Cancel the programme

For programmes at high temperatures:
Press the Ü button.
1.
To cool down laundry: Select Rinse .
2.
Press the Ü button.
3.
For programmes at low temperatures:
Press the Ü button.
1.
Select Spin or Empty .
2.
Press the Ü button.
3.
Operating the appliance
Programme end during rinse
hold
In the display panel, $ flashes, and the
preset spin speed and remaining
programme length are displayed for the
selected programme.
Continue the programme by:
Pressing the Ü button or
Changing the spin speed, or setting
the programme selector to Empty
and then pressing the Ü button.

Programme end

- 0 - and Ï appear in the display panel.
The Ü button indicator lamp is off.
Removing laundry/switching
off the appliance
Open the door and remove the
1.
laundry.
Press the # button. The appliance is
2.
switched off.
Turn off the tap.
3.
Not required for Aqua-Stop
Note:
models.
Notes
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
Wipe the rubber seal dry.
Leave the door and detergent
drawer open so that any residual
water can evaporate. ~ Page 25
en
23