Siemens XQG80-WM12P1681W Buku Petunjuk dan Petunjuk Instalasi - Halaman 27
Jelajahi secara online atau unduh pdf Buku Petunjuk dan Petunjuk Instalasi untuk Mesin cuci Siemens XQG80-WM12P1681W. Siemens XQG80-WM12P1681W 40 halaman.
Halaman Cetak
Faults
Water is not drained.
Water not visible in the
drum.
Spin result not satisfac-
tory.
Spin cycle activated sev-
eral times.
Dispenser not completely
rinsed out.
Stain formation in the
washing machine.
Foam is coming out of the
detergent drawer.
Excessive noise, vibra-
tions and wandering dur-
ing spin cycle.
Display panel/indicator
lights do not function
while the appliance is run-
ning.
Programme duration
changes during the wash
cycle.
Detergent residues on the
laundry.
If a fault cannot be rectified (switching the machine on and off) or a repair is required:
Set programme selector to $
■
Turn off the tap and call the after-sales service.
■
Cause/Remedy
- - - -(Rinse stop= without final spin) selected?
■
Clean the drain pump. ~ Page 23
■
Clean outlet pipe and/or drainage hose.
■
Not a fault – water below the visible area.
Wash small and large items of washing together.
■
(Less iron) selected?
■
Too low speed selected?
■
Not a fault – unbalanced load detection system adjusts imbalance.
Remove the insert. Clean detergent drawer and re-insert.~ Page 22
■
Run
(Drum clean) 90 °C programme without washing.
Use standard detergent.
Too much detergent used?
Mix 1 tablespoon of fabric conditioner with ½ litre of water and pour into
dispenser II in the detergent drawer.
Reduce detergent dosage for the next wash cycle.
Appliance aligned?
■
Align the appliance. ~ Page 36
Appliance feet fixed?
■
Secure appliance feet. ~ Page 36
Transportation safety devices removed?
■
Remove transportation protection devices. ~ Page 33
Power failure? ~ Page 25
■
Circuit breaker tripped? Reset the circuit breaker /change the fuse.
■
If the fault occurs repeatedly, call the after-sales service.
■
Not a fault – unbalanced load detection system adjusts imbalance by
■
repeatedly distributing the laundry.
Not a fault – foam detection function active. Additional rinse cycle.
■
Occasionally phosphate-free detergents contain water-insoluble residues.
■
Select
(Rinse) or brush the laundry after washing.
■
(Off) and pull out the mains plug out of the socket.
Faults and what to do about them
en
27