Siemens 3KC7 Panduan Petunjuk Pengoperasian - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Beralih Siemens 3KC7. Siemens 3KC7 22 halaman. Automatic transfer switching equipment atse 250 a...800 a
Halaman Cetak
EN
Damage to the device possible. The product is designed for a rated impulse withstand voltage U
NOTICE
power circuit and 4 kV for the motor unit. If the product shall be used in an application where overvoltages of > 4 kV might
occur, appropriate other means like surge arresters will have to be used to limit these overvoltages to a maximum of 4 KV.
中文
可能损坏设备。 这款产品采用专门设计，对于电源电路，其额定冲击耐受电压 Uimp 为 12 KV，对于电机单元，其 U
注意
4 kV。如果将这款产品用于过电压可能大于 4 kV 的应用中，必须使用浪涌抑制器等装置将过电压限制在最大值为 4 KV 的
范围内。
max. U
e
U
= 4 kV
imp
= 415 V AC
U
= 4 kV
imp
of 12 KV for the
imp
为
imp
11
L1V30800010-01 / 552047A