Chapter 8
Monitoring the Cisco Unified IP Phone Remotely
Table 8-5
Streaming Statistics Area Items
Item
Remote Address
Local Address
Start Time
Stream Status
Host Name
Sender Packets
Sender Octets
Sender Codec
1
Sender Reports Sent
Sender Report Time
1
Sent
Rcvr Lost Packets
Avg Jitter
Rcvr Codec
1
Rcvr Reports Sent
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17751-01
To display a Streaming Statistics area, access the web page for the phone as
described in the
"Accessing the Web Page for a Phone" section on page
then click the Stream 1, Stream 2, Stream 3, Stream 4,or Stream 5 hyperlink.
Table 8-5
describes the items in the Streaming Statistics areas.
Description
IP address and UDP port of the destination of the stream.
IP address and UPD port of the phone.
Internal time stamp indicating when Cisco Unified Communications
Manager requested that the phone start transmitting packets.
Indication of whether streaming is active or not.
Unique, fixed name that is automatically assigned to the phone based on its
MAC address.
Total number of RTP data packets transmitted by the phone since starting this
connection. The value is 0 if the connection is set to receive only mode.
Total number of payload octets transmitted in RTP data packets by the phone
since starting this connection. The value is 0 if the connection is set to receive
only mode.
Type of audio encoding used for the transmitted stream.
Number of times the RTCP Sender Reports have been sent.
Internal time stamp indicating when a RTCP Sender Report was sent.
Total number of RTP data packets that have been lost since starting receiving
data on this connection. Defined as the number of expected packets less the
number of packets actually received, where the number of received packets
includes any that are late or duplicate. The value displays as 0 if the
connection was set to send-only mode.
Estimate of mean deviation of the RTP data packet inter-arrival time,
measured in milliseconds. The value displays as 0 if the connection was set to
send-only mode.
Type of audio encoding used for the received stream.
Number of times the RTCP Receiver Reports have been sent.
Streaming Statistics
8-2, and
8-17
Halaman Cetak