Cisco 7940G Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 7940G. Cisco 7940G 20 halaman. Ios telephony services ip phone
Juga untuk Cisco 7940G: Panduan Pengguna (21 halaman), Panduan Pengguna (25 halaman), Lembar data (7 halaman), Manual (35 halaman), Referensi Cepat (2 halaman), Panduan Pengguna (15 halaman), Panduan Referensi Cepat (2 halaman), Panduan Telepon (17 halaman), Panduan Administrator (15 halaman), Panduan Pengguna (16 halaman), Panduan Referensi (24 halaman), Panduan Administrasi (29 halaman), Manual (21 halaman), Panduan Instalasi (12 halaman), Panduan Pengguna (10 halaman)

Use Audio Paging

Audio paging provides a one-way voice path to the phones that have been designated to receive paging. It does not have a

press-to-answer option like the intercom feature.

To use the paging function for paging a group, use the following method:

1. Select an available phone line by lifting the handset. Listen for the dial tone.

2. Dial the designated paging group number.

Each idle IP phone that has been configured with the paging number answers automatically in speakerphone mode, and the

phone displays the caller ID.

3. When you finish speaking your message and hang up, the phones are returned to their idle states.

Use the Intercom Feature

Cisco Unified CallManager Express supports intercom functionality for one-way and press-to-answer voice connections using

a dedicated pair of intercoms on two phones that speed-dial each other.

To use the intercom feature, use the following method:

1. Press the Menu button.

2. Use the Navigation button to select Directories.

3. Use the Navigation button to select Speed Dial.

4. Select intercom Speed Dial.

The called IP phone automatically answers the call in speakerphone mode with mute activated. A beep sounds to alert the

recipient to the incoming call.

To respond to an intercom call, press the Mute button, or lift the handset.

Activate Do Not Disturb (DND)

For visual call alerting and information without audible ringing, use DND. Calls receive normal call-forward-busy and

no-answer treatment.

To activate the Do-Not-Disturb feature, use the following method:

1. Press the more soft key to locate the DND soft key.

2. Press the DND soft key. A display text message indicates that the phone is in Do-Not-Disturb mode.

Note

Pressing the DND soft key immediately forwards the call to the call-forward destination set on the phone. If the

call-forward destination is not set, pressing the DND soft key disables the ringer.

To deactivate the Do-Not-Disturb feature, repeat Steps 1 and 2.

Setting and Adjusting Your Cisco Unified IP Phone

Adjust the Volume for the Current Call

To adjust the handset, speakerphone, or headset volume for the current call, use the following method:

1. During a call, press the Up or Down Volume button.

2. Press the Save soft key to apply the new volume level to future calls.

Adjust the Ring Volume

To adjust the ring volume, press the Up or Down Volume button while the handset is in its cradle.