Cisco 7940G Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 7940G. Cisco 7940G 20 halaman. Ios telephony services ip phone
Juga untuk Cisco 7940G: Panduan Pengguna (21 halaman), Panduan Pengguna (25 halaman), Lembar data (7 halaman), Manual (35 halaman), Referensi Cepat (2 halaman), Panduan Pengguna (15 halaman), Panduan Referensi Cepat (2 halaman), Panduan Telepon (17 halaman), Panduan Administrator (15 halaman), Panduan Pengguna (16 halaman), Panduan Referensi (24 halaman), Panduan Administrasi (29 halaman), Manual (21 halaman), Panduan Instalasi (12 halaman), Panduan Pengguna (10 halaman)

Setting and Adjusting Your Cisco Unified IP Phone

Adjust the Volume for the Current Call

Press the Up or Down Volume button while the handset is in use.

Adjust the Ring Volume

Press the Up or Down Volume button while the handset is in its cradle.

Select the Ring Type

To change the ring type, perform the following steps:

1. Press the Menu button.

2. Press 3 on the keypad, or use the Navigation button to locate Settings and then press the Select soft key.

3. Use the Navigation button to scroll through the options. Use the Select soft key to select ring type.

Use the Navigation button to scroll through the ring types.

–

Use the Play soft key to play the ring sound sample.

–

4. When you find the ring you want, press the Select soft key.

5. Press the Ok soft key to save your ring selection, or press the Cancel soft key to exit to the previous menu without changing

the setting.

6. Press the Exit soft key to return to the previous directory menu.

Adjust the Display Contrast

To adjust the display contrast, perform the following steps:

1. Press the Menu button.

2. Press 3 on the keypad, or use the Navigation button to locate Settings and then press the Select soft key.

3. Use the Navigation button to scroll through the available settings. Locate Contrast and press the Select soft key.

4. Press the Up or Down soft key to increase or decrease the screen contrast.

5. Press the Ok soft key to select your contrast setting.

6. Press the Save soft key to save the setting, or press Cancel to exit to the previous menu without changing the setting.

7. Press the Exit soft key to return to the main directory menu.