Cisco 7940G Panduan Administrator - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Administrator untuk Telepon IP Cisco 7940G. Cisco 7940G 15 halaman. Ios telephony services ip phone
Juga untuk Cisco 7940G: Panduan Pengguna (21 halaman), Panduan Pengguna (25 halaman), Lembar data (7 halaman), Manual (35 halaman), Referensi Cepat (2 halaman), Panduan Pengguna (15 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (20 halaman), Panduan Telepon (17 halaman), Panduan Pengguna (16 halaman), Panduan Referensi (24 halaman), Panduan Administrasi (29 halaman), Manual (21 halaman), Panduan Instalasi (12 halaman), Panduan Pengguna (10 halaman)

Cisco 7940G Panduan Administrator
Chapter 1
Product Overview

Supported Features

In addition to the features illustrated in
features.
Physical Features
Network Features
Configuration Features
The Cisco SIP IP Phone provides the ability to:
OL-2206-01
Adjustable ring tone
Hearing-aid compatible handset
Headset compatibility
Integrated two-port Ethernet switch that allows the telephone and a computer to share a single
Ethernet jack
Direct connection to a 10BASE-T or 100BASE-T Ethernet (RJ-45) network (half- or full-duplex
connections are supported)
Large (4.25 x 3 in. or 10.79 cm. x 7.62 cm.) display with adjustable contrast
IP address assignment—Dynamic Host Configuration Protocol (DHCP) client or manually
configured via a local setup menu.
Network startup using DHCP and Trivial File Transfer Protocol (TFTP).
Telnet support—Allows the user to use Telnet to connect directly to the Cisco SIP IP phone to debug
and troubleshoot the phone. See the
information on configuration parameters.
Ping support—Allows the user to use ping to see if a Cisco SIP IP phone is operational and how long
the response time is from the phone.
Traceroute support—Allows the user to use traceroute to see the path that a Cisco SIP IP phone
traverses in the route to its desired destination.
Configure Ethernet port mode and speed
Register with or unregister from a proxy server
Specify a TFTP boot directory
Configure a label for phone identification display purposes
Configure a name for caller identification purposes for each active line on a phone
Configure a 12- or 24-hour user interface time display
Figure
1-2, the Cisco SIP IP phone also provides the following
"Managing Cisco SIP IP Phones" section on page 3-1
Cisco SIP IP Phone Administrator Guide Version 3.0
What Is the Cisco SIP IP Phone?
for more
1-5