Samsung UN40D5003BF Panduan Pengguna - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Samsung UN40D5003BF. Samsung UN40D5003BF 35 halaman. 4 series; 5 series
Juga untuk Samsung UN40D5003BF: Panduan Pengguna (35 halaman), Panduan Pengguna (49 halaman)
Basic Features
Using Favorite Channels
¦
O
MEnUm → Channel → Channel list → EnTERE
Add to Favorite / Delete from Favorite
*
Set channels you watch frequently as
Favorites.
1. Select a channel and press the
button.
2. Add or delete a channel using the Add
to Favorite or Delete from Favorite
menu respectively.
6
6-1
7-1
8
9
9-1
10
10-1
11-1
Air
Zoom
B
C
Memorizing channels
¦
O
MEnUm → Channel → EnTERE
Antenna (Air / Cable)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Auto Program
■ Air: Air antenna signal.
■ Cable: Cable antenna signal.
■ Auto: Air and Cable antenna.
✎
nOTE
x
When selecting the Cable TV system: Selects the
cable system. STD, hRC and IRC identify various
types of cable TV systems. Contact your local cable
company to identify the type of cable system that
exists in your particular area. At this point, the signal
source has been selected.
x
After all the available channels are stored, it starts
to remove scrambled channels. The Auto Program
menu then reappears.
12
English
MEDIA.P
t
TOOlS
Air
SLEEP
♥ TV #6
♥ TV #7
Delete
Add to Favorite
Air
Timer Viewing
Air
Select All
♥ TV #9
Auto Program
Air
♥ TV #10
♥ TV #11
Select T Tools
t
how to Stop Auto Programming
1. Press the EnTERE button.
2. A message will ask Stop Auto Program? Select Yes by
pressing the ◄ or ► button.
3. Press the EnTERE button.
Editing channels
¦
O
MEnUm → Channel → Channel list → EnTERE
t
Channel name Edit
1. Select a channel and press the
2. Edit the channel name using the Channel name Edit
menu.
S.MODE
■ Channel name Edit (analog channels only): Assign your
own channel name.
Other Features
¦
O
MEnUm → Channel → EnTERE
Clear Scrambled Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20~30 minutes.
how to Stop Searching Scrambled Channels
1. Press the EnTERE button to select Stop.
2. Press the ◄ button to select Yes.
3. Press the EnTERE button.
✎
This function is only available in Cable mode.
P.SIZE
TOOlS
button.
P.MODE