Samsung VRR P10 Panduan Produk - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Produk untuk Monitor Samsung VRR P10. Samsung VRR P10 50 halaman.

7.1.2 Screen connection file loading

Click "Load from File" in the "Screen connection" interface of the software parameter

settings. Load the "*.scr" file, then click the "Send to HW" button. After the display

shows normal, click "Save", as shown in Picture 7-6, Picture 7-7.

Note: Do not modify any parameters after non-professionals load the "*.scr" file. If the

parameters are inadvertently modified, the display screen is not displayed properly.

The screen file needs to be reloaded and sent to the receiving card.

At this point, the entire screen connection parameter setting has been completed. At

this time, the entire screen should be displayed on the desktop of the computer. Next,

you can play the program you want in the initial interface of NovaLCT-Mars. For

details, please refer to the software manual. It can be seen in the "Help" submenu

under the software interface "Help".

Pic 7-8

Picture 7-6

Picture 7-7

17 / 50