Samsung XL2370-1 Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Samsung XL2370-1. Samsung XL2370-1 46 halaman. Samsung lcd monitor user manual
Halaman Cetak
Avoid installing the product in a location
exposed to dust, moisture (sauna), oil,
smoke or water (rain drops) and installing it
within a vehicle.
•
This may result in electric shock or fire.
Avoid installing the product at an easily
reachable height where children may reach
it.
•
If a child touches the product, the
product may fall and this may result in
injury.
•
Since the front part is heavier, install the
product on a flat and stable surface.
Caution
Do not let the product drop while moving it.
•
This may result in a problem with the
product or injury.
When installing the product on a console or
shelf, make sure that the front of the product
does not protrude out of the console or
shelf.
•
Otherwise, this may cause the product
to fall off and result in a malfunction or
injury.
•
Make sure to use a cabinet or shelf
suitable to the size of the product.
If the product is installed in a location where
the operating conditions vary considerably,
a serious quality problem may occur due to
the surrounding environment. In this case,
install the product only after consulting one
of our service engineers about the matter.
•
Places exposed to microscopic dust,
chemicals, too high or low temperature,
high humidity, such as airports or
stations where the product is
continuously used for a long time and so
on.
Cleaning Related
Since using a surfactant, which contains a large amount of alcohol, solvent or other strong chemicals, may result
in the discoloration or cracking of the product exterior or the panel surface coming off, be sure to use the recom-
mended cleansing agent only.
You can purchase the recommended cleansing agent from a service center.
Major Safety Precautions
Avoid installing the product in a location
exposed to direct sunlight and installing the
product near a heat source such as a fire or
heater.
•
This may shorten the product life cycle
or cause fire.
Do not place the product face down on the
floor.
•
This may damage the panel of the
product.
When putting the product down, handle it
gently.
•
Otherwise, it may result in a problem
with the product or injury.
1-3