Siemens SITRANS L Series Panduan Petunjuk Pengoperasian - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Beralih Siemens SITRANS L Series. Siemens SITRANS L Series 50 halaman. Capacitance transmitters
Juga untuk Siemens SITRANS L Series: Petunjuk Pengoperasian yang Ringkas (45 halaman), Panduan Petunjuk Pengoperasian (33 halaman), Panduan Petunjuk Pengoperasian (44 halaman)

Installing/mounting

2.3 Mounting instructions

2.3

Mounting instructions

Note

Oscillating rod

Do not bend, shorten or extend the oscillating rod since this will destroy the device.

Note

Direction of the cable glands

When the unit is mounted from the side, ensure that the cable glands face downward and

are closed to avoid water penetration into the housing. The housing can be rotated against

the threaded connection after mounting.

Note

Sealing

Seal the process thread with Teflon tape in case of process pressure.

Note

Precaution for later dismounting/ Service

Grease the screws of the lid if corrosive atmosphere is present (e.g. close to sea).

Note

Switching point

Heavy bulk material -> the signal output switches when the oscillating rod is covered by a

few mm of material.

Light bulk material -> the signal output switches when the oscillating rod is covered a few cm

of material.

Operating Instructions, 05/2019, A5E44908583-AB

SITRANS LVS300